Norton Rixson EML19 Heavy Duty...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,993.00
$1,828.45
Norton Rixson Norton Rixson Model EML19 - Heavy Duty, High Traffic Electrified Intermediate Power Transfer Pivot RIX-EML19

Norton Rixson EML19 Heavy Duty Electrified Power Transfer Pivot with 3/4" Offset for Lead-Lined Doors

(No reviews yet) Write a Review

Model: EML19-4 Wires-RH-626
$1,993.00
$1,828.45
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,993.00
$1,828.45
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Norton Rixson EML19 Heavy Duty Electrified Power Transfer Pivot with 3/4" Offset for Lead-Lined Doors

Professional Electrified Pivot Solution for Heavy-Duty Applications

The Norton Rixson EML19 is an offset-hung, electrified power transfer pivot specifically engineered for heavyweight or lead-lined high-traffic doors. This intermediate pivot features a 3/4" offset design for 1-3/4" doors and provides reliable power transfer with 24-gauge wire rated at 2 amps for low voltage applications. The handed configuration ensures proper installation for specific door applications, while the factory-assembled construction guarantees consistent performance in demanding commercial environments.

Professional Features & Benefits

  • Heavy-Duty Construction: Designed specifically for heavyweight and lead-lined doors in high-traffic commercial applications.
  • Electrified Power Transfer: 24-gauge wire rated at 2 amps for low voltage, class II wiring applications with options for four, six, eight, or twelve wires.
  • Precision Offset Design: 3/4" (19mm) offset configuration optimized for 1-3/4" door thickness applications.
  • Factory-Assembled Quality: Door and jamb portions are factory assembled and cannot be separated, ensuring consistent alignment and performance.
  • ElectroLynx® Compatibility: Available with ElectroLynx® option using suffix "QC#" for enhanced connectivity solutions.
  • Fire Door Assembly Option: Available for fire door assemblies with ferrous base material (specify E-FML19) and 20-minute label option.
  • Professional Installation Hardware: Furnished with wood and machine screws, with optional Torx screws available for enhanced security.
  • Manufacturer Warranty: 2-year limited warranty for added confidence and protection.

Technical Specifications

  • Application: Electrified, Lead-Lined
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Hand Direction: Handed
  • Duty Level: Heavy Duty
  • Electronic: Yes
  • Fasteners: Torx Screws Optional
  • Fire Rating: No
  • Hang Type: Offset Hung
  • Mounting Method: Center Hung
  • Pivot Type: Intermediate
  • Product Attribute: Pivots
  • Product Category: Door Hinges and Pivots
  • Product Group: Door Hinges and Pivots
  • Product Subgroup: Pivots and Pivot Sets
  • Product Type: Electrified Pivots
  • Series: EML19 Series
  • Subcategory: Intermediate Pivots
  • Warranty: 2 Year Limited

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm low voltage, class II wiring capacity and specify required number of wires (four, six, eight, or twelve) before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Prepare door edge with 1/8" bevel in 2" as specified. Ensure door thickness is 1-3/4" and verify compatibility with lead-lined or heavyweight door construction.
  4. Install ML19 intermediate pivot as required for proper door support. Mount the electrified pivot unit ensuring proper alignment with 3/4" offset positioning.
  5. Route and connect wiring according to manufacturer wiring diagrams. Use 24-gauge wire rated for 2 amp capacity and appropriate connectors for the application.
  6. Configure handed operation per door requirements and test pivot movement throughout full range of motion.
  7. Restore power and test all electrical functions including power transfer continuity and integration with connected systems.
  8. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Healthcare Facilities with Lead-Lined Doors
  • Commercial Buildings with Heavy-Duty Door Requirements
  • Educational Institutions with High-Traffic Areas
  • Government and Municipal Buildings
  • Industrial Facilities with Specialized Door Applications
  • Multi-Tenant Commercial Properties
  • Fire Door Assembly Applications (with E-FML19 option)

Why Choose Norton Rixson Quality?

Norton Rixson EML19 electrified pivots deliver professional-grade reliability with factory-assembled construction specifically engineered for heavyweight and lead-lined door applications. The 2-year limited warranty and heavy-duty rating ensure dependable performance in the most demanding commercial environments. Designed for high-traffic applications where consistent power transfer and robust pivot operation are essential.

Product Specs

Series:
EML19 Series
Duty Level:
Heavy Duty
Hang Type:
Offset Hung
Warranty:
2 Year Limited
Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Intermediate Pivot Hinges
Subcategory:
Intermediate Pivots
Fasteners:
Torx Screws Optional
Commercial/Residential:
Commercial
Electronic:
Yes
Pivot Type:
Intermediate
Mounting Method:
Center Hung
Application:
Electrified, Lead-Lined
Product Attribute:
Pivots
Door Hand Direction:
Handed
Fire Rating:
No
Product Category:
Door Hinges and Pivots
Department:
Door Hardware

Norton Rixson EML19-4 Wires-RH-626 – Frequently Asked Questions

1) What door thickness does the EML19 3/4 inch offset pivot fit?
The 3/4 inch (19mm) offset on the EML19 is set up for 1-3/4 inch doors, which is the standard commercial leaf thickness. The door edge needs a 1/8 inch bevel in 2 inches. If your door is a different thickness, this offset dimension is not the one you want.
2) How many wires do I need to specify when ordering an EML19 power transfer pivot?
Four, six, eight, or twelve wires. Count the devices on the door that need power or monitoring and add spares: an electric latch retraction or electrified lock takes two, a door position switch takes two, a request-to-exit signal takes two, and a card reader on the door leaf takes more. Pulling extra conductors at install costs nothing compared to re-ordering the pivot later. All conductors are 24 gauge rated at 2 amps, low voltage class II only.
3) Can I run 120V or a maglock's main power through the EML19 pivot?
No. The EML19 conductors are 24 gauge rated at 2 amps, and the pivot is for low voltage class II circuits only. That covers 12V and 24V DC electric strikes, electrified locksets, latch retraction signal, door position switches and reader circuits. Line voltage does not go through this part. Check the inrush current of your lock too, not just the holding current, against the 2 amp figure.
4) Is the EML19 pivot handed, and how do I order left hand versus right hand?
Handed, yes. You order the EML19 as either Left Hand or Right Hand, and the door and jamb portions are factory assembled and cannot be separated, so there is no field-swapping the hand. Determine the hand from the door before you order. A wrong-hand pivot is a return, not an adjustment.
5) Is the EML19 electrified pivot the only pivot I need, or do I need more hardware to hang the door?
The EML19 is an intermediate pivot, not a complete hanging set. Intermediate pivots share the load in the middle of the leaf; the door still hangs on its top and bottom pivot arrangement. On a heavyweight or lead-lined door you install an ML19 intermediate pivot as required for door support alongside it. Plan the full pivot set, not just the electrified one.
6) Can I use an EML19 power transfer pivot on a fire rated door assembly?
There is a fire door route, but it is a different order. The standard 3/4 inch offset EML19 is not fire rated. For a fire door assembly you specify the E-FML19 with ferrous base material, and there is a 20 minute label option in the offset lineup. Match the label on your door assembly to the option you order rather than assuming the standard part will pass an inspection.
7) Is a power transfer pivot better than a door loop or an electric hinge for a heavy hospital door?
On a heavyweight or lead-lined leaf, a power transfer pivot is the type that suits the door. A surface door loop is exposed, gets grabbed, and looks wrong on a clinical corridor. An electric through-wire hinge only works if the door hangs on butt hinges, and a lead-lined imaging room door usually does not. The EML19 is offset hung with intermediate pivot support, so it carries the weight and passes 24 gauge low voltage conductors in one part. If your door is a standard weight hollow metal leaf on butts, an electric hinge is the simpler buy.
8) What is ElectroLynx on the EML19, and should I order it?
ElectroLynx is a quick-connect option on the EML19, ordered with the suffix QC followed by the connector number. It gives you a plug connector instead of bare leads, so the pivot mates to matching ElectroLynx harnesses on the lock and the power supply without splicing in the frame. Worth ordering when the rest of the opening hardware is already ElectroLynx; skip it if your integrator is landing conductors in a junction box anyway.
9) Can I take the EML19 apart to install the jamb half first?
No. The door portion and jamb portion of the EML19 are factory assembled and cannot be separated. Prep both the door edge and the frame before you set the unit, and plan the wire pull so the conductors are ready when the pivot goes in. Trying to split it damages the alignment the factory assembly is there to hold.
10) What finishes does the EML19 electrified pivot come in to match the rest of my door hardware?
Ten finishes: 605 bright brass, 606 satin brass, 611 bright bronze, 612 satin bronze, 613 satin bronze oil-rubbed, 618 bright nickel, 619 satin nickel, 622 matte black, 625 bright chrome and 626 satin chrome. Those are standard BHMA finish numbers, so 626 satin chrome on the pivot matches 626 on your locksets and closers across a facility.
11) Can I get the EML19 pivot with tamper resistant screws for a corrections or public area door?
Torx screws are an option on the EML19 instead of the standard fasteners. It ships with wood and machine screws as furnished, and you specify Torx where you want a driver-restricted head on an accessible face. Useful on detention, transit and public-corridor openings where a Phillips head invites a pocket screwdriver.
How fast can I get the Norton Rixson EML19-4 Wires-RH-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Norton Rixson EML19-4 Wires-RH-626 come with a warranty?
Absolutely. The Norton Rixson EML19-4 Wires-RH-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Norton Rixson EML19-4 Wires-RH-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Norton Rixson EML19-4 Wires-RH-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!