You may also like
Nut 3/4-10 Hvy Hx Nut St-Zn (100pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Nuts
Metallics HHN34C – Frequently Asked Questions
1) What thread size is the Metallics HHN34C heavy hex nut?
The HHN34C is a 3/4-10 nut, meaning 3/4 inch nominal diameter with 10 threads per inch, which is the standard UNC coarse pitch for 3/4 inch rod and bolts. It will thread onto 3/4-10 all-thread rod, anchor bolts, and hex bolts; it will not fit 3/4-16 fine thread.
2) What is the difference between a heavy hex nut and a standard finished hex nut in 3/4-10?
A heavy hex nut like the HHN34C has a larger across-flats width and greater thickness than a finished hex nut of the same 3/4-10 thread. That extra bearing area spreads load over a wider footprint, which is why heavy hex is the usual call on structural connections, strut and trapeze hangers, and anchor bolts. It also means a bigger wrench size, so check your socket and the clearance in the connection before swapping a finished hex for heavy hex.
3) Are these 3/4-10 nuts plated for corrosion resistance, and can I use them outdoors?
These are steel nuts with a zinc finish. Zinc plating handles indoor and protected-exterior service and resists general rust in dry or sheltered conditions. For constant weather exposure, wet locations, pool areas, or coastal air, zinc is on the light side; hot-dip galvanized or stainless is the better call there. Also match the plating to your rod, pairing a zinc nut with hot-dip rod can bind on the thread fit.
4) Can I use these heavy hex nuts for electrical trapeze hangers and strut support runs?
Yes, that is the typical use. The HHN34C is catalogued with electrical fasteners and in 3/4-10 it matches the all-thread rod commonly used for overhead trapeze supports, conduit racks, and strut hangers. Pair it with a flat washer where it bears on strut or channel so the nut does not pull through the slot, and use a second nut or a lock nut where vibration is a concern.
5) How many nuts come in a box of Metallics HHN34C?
HHN34C is packed 100 pieces per box. For an electrical or mechanical crew running 3/4 inch rod on trapeze hangers, that is a job-quantity box rather than a loose count, so figure two nuts per hanger point when you estimate how many boxes the run needs.
How fast can I get the Metallics HHN34C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics HHN34C come with a warranty?
Absolutely. The Metallics HHN34C is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics HHN34C?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics HHN34C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.