You may also like
Nuts 3/8-16 Hx Nut Galv (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 21/64 in.
- Fastener Head Width:
- 0.551 - 0.562 in.
- Fastener Height:
- 0.320 - 0.337
- Fastener Width:
- 0.628 - 0.650
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B68-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Nut_Domestic_Gr_2_Gr_5_Gr_8_Gal_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 2.7 in
- Product Length:
- 3 in
- Product Weight:
- 1.6 lbs
- Product Width:
- 3 in
- Remarks:
- The catalog UPC differ from the tarnsaction daat spreadsheet UPC
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 16
- Department:
- Electrical
- Product Subgroup:
- Nuts
- Product Type:
- Hexagonal Nut
- Type2:
- Hexagonal Nut
- Series:
- JN
- Product Finish:
- Galvanized
- Product Details:
- Hexagonal Nut
- Product Material:
- Steel
Metallics JN165G – Frequently Asked Questions
1) What thread does the Metallics JN165G hex nut take, and will it fit 3/8 inch all-thread rod?
The JN165G is a 3/8-16 hex nut, so it threads onto 3/8 inch rod or bolts cut at 16 threads per inch. That is the standard coarse pitch for 3/8 inch hardware, which is what hanger rod and strut bolts for electrical and mechanical work normally use. It will not run onto a 3/8-24 fine thread bolt.
2) Are Metallics JN165G galvanized hex nuts Buy American or ARRA compliant?
No on both counts. The JN165G is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your project carries a domestic-sourcing requirement, this is not the nut to spec.
3) Is the galvanized finish on the JN165G nut suitable for damp or outdoor locations?
These are steel nuts with a galvanized finish, which is the usual choice for damp interior work, unheated spaces, and protected exterior runs where plain steel would rust. For direct, continuous saltwater or chemical exposure, stainless is the better call.
4) How many nuts come in a jar of Metallics JN165G, and is that the smallest order?
They ship as a jar of 100 nuts, and the jar is the minimum order unit, so 100 pieces is the smallest quantity. Total weight is 1.6 lbs per jar.
5) What hardness are Metallics JN165G hex nuts rated to?
Hardness is Rockwell B68 to C32. For a maintenance crew standardizing on one nut for strut, rod hanger, and panel work, that puts it in general-purpose steel nut territory rather than a high-strength structural nut, so pair it with matching grade rod or bolts rather than high-strength fasteners.
How fast can I get the Metallics JN165G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JN165G come with a warranty?
Absolutely. The Metallics JN165G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JN165G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JN165G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.