NUVO Lighting 60-3149 2 Light, 13in, Semi-Flush with Frosted White Glass

The 60-3149 takes two A19 lamps on an E26 medium base, rated 60W each, and no bulbs ship with the fixture. You order lamps separately. Since it is listed as incandescent technology, any A19 medium-base lamp at or below 60W works, including LED or CFL replacements in that base.

No. The 60-3149 is an indoor fixture with a dry location rating only, so it should not go in a shower or tub zone, over a steam area, or anywhere outdoors, including a covered porch. Use a damp or wet rated fixture in those spots. A general bathroom ceiling away from the tub and shower is fine if local code is satisfied with a dry location fixture.

Dimming on the 60-3149 is lamp dependent. There is no driver in the fixture, so whether it dims comes down to the A19 medium-base lamp you install. A standard incandescent A19 will dim on a common incandescent dimmer; if you install LED lamps, they have to be marked dimmable and matched to the dimmer type.

The 60-3149 carries a cULus safety listing, which covers it for use in both the US and Canada, and it is RoHS compliant. It runs on 120V line voltage, so it wires to a standard branch circuit with no transformer. Note that it is flagged under California Prop 65 for lead.

No. The 60-3149 is not CCT selectable, because it has no integrated LED source. Color temperature is set entirely by the two A19 medium-base lamps you choose, so you pick 2700K, 3000K, 4000K or whatever the job spec calls for at the lamp. That is often an advantage in multi-family work, since you can restandardize color later without changing fixtures.

The part is NUVO Lighting 60-3149, also printed as 60/3149, and it comes in a single finish, Mahogany Bronze. There is no alternate finish under this number, so if a drawing calls for nickel or white you are looking at a different NUVO model.