NUVO Lighting 60-3262 2 Light, 13in, Flush Mount with Frosted White Glass

The 60-3262 carries a Damp location rating and is listed for indoor use, so a bathroom ceiling or a covered porch ceiling is fine as long as it isn't exposed to direct water. It is not a wet-location fixture, so skip it for direct shower sprays or uncovered exteriors. Safety listing is cULus.

Bulbs are not included. You'll need two A19 lamps with a medium E26 base, 60W maximum each, on a 120V circuit. Buy them separately when you order the fixture, otherwise the crew shows up with nothing to put in it.

Dimming on the 60-3262 is lamp dependent. The fixture itself has no driver or integrated LED, it's an incandescent-technology fixture with two E26 sockets, so whether it dims comes down to the lamps you install. Standard incandescent A19 lamps dim on a common incandescent dimmer; if you put in LED A19 replacements, they have to be marked dimmable and matched to the dimmer.

At 4.26 lbs the 60-3262 is a light fixture and mounts to a standard ceiling-mounted outlet box. No bracing beyond a properly secured box is involved at that weight.

The body is steel in a Brushed Nickel finish, with a single frosted glass shade. Steel holds up better than resin trims in corridors and stairwells that take bumps from carts and ladders. Glass diffuser is frost finish, which hides the two lamps and softens the output.

The 60-3262 is a Brushed Nickel fixture with frosted white glass, and nickel is the only finish under that part number. If a job calls for bronze or white trim, that's a different NUVO catalog number, not an option on this one.

Yes. The two sockets are E26 medium base sized for A19 lamps rated to 60W maximum, and an LED A19 of equal or lower wattage drops right in. You gain the lower draw without changing the fixture; just confirm the LED is dimmable if the room is on a dimmer, since dimming here depends entirely on the lamp.

There is one glass shade, frost finish, measuring D:9.84 H:3.44. That diffuser sits inside the 13.25 inch overall diameter of the fixture.

RoHS compliant, yes. For California, the fixture carries a Prop 65 disclosure for lead, which matters if you're buying for a public or institutional facility that tracks those notices.