NUVO Lighting 60-3166 Empire, 2 Light, 15in, Vanity with Frosted White Glass

The Empire 60-3166 is an indoor fixture with a Damp location rating, so it is fine on a bathroom wall above a vanity where it sees steam and humidity. It is not rated for wet locations, so keep it out of a shower or tub enclosure spray zone and off exterior walls. Safety listing is cULus.

Bulbs are not included. You need two A19 lamps with a medium E26 base, and the fixture is rated to 100W total. Standard incandescent technology, 120V. If you want LED, use A19 E26 retrofit lamps within that wattage rating.

Plan on 14.88 inches of width, 6.13 inches of height, and 8 inches of extension off the wall. That 8 inch projection is worth checking against a narrow powder room or a spot beside a swinging door or medicine cabinet, since it is deeper than many flat-back sconces.

No. The Empire 60-3166 is listed as not ADA compliant, and its 8 inch extension puts it past the 4 inch protruding-object limit for wall-mounted items in circulation paths. For ADA-sensitive corridors or accessible restrooms in commercial and institutional work, specify a fixture marked ADA compliant with a shallow projection.

Yes. It is a wall-mounted fixture in the up-or-down category, so you can install it with the glass facing up for softer ceiling-bounced light or down for more light on the counter. Each of the two frosted shades measures 6.22 inches in diameter by 4 inches high.

One configuration: Mahogany Bronze frame with frosted white glass, two shades. Construction is glass and steel. Order the same model number for every unit and the finish will match across openings, which is the usual concern on multi-family and hospitality turns.

The Empire 60-3166 is a lamped fixture: two E26 sockets, no integrated LED, and no CCT selection. That means the color temperature is whatever lamp you buy and a tenant or maintenance tech can swap it in seconds, which is why lamped vanities still win on rental turns. An integrated CCT-selectable LED bar sets color at the fixture and cannot be re-lamped, so choose that only where you want fixed output and no bulb stocking.

The fixture weighs 3.36 lbs, so it is a one-hand hold while you make up the leads on a standard wall box. It mounts to the wall and spans 14.88 inches, which is wider than the box, so expect the mounting strap to carry the load centered on the box.

Two items for the submittal file: the fixture carries a California Prop 65 warning for lead, and it is RoHS compliant. Safety listing is cULus, voltage 120V.