NUVO Lighting 60-328 Ballerina, 2 Light, 18in, Vanity with Alabaster Glass Bell Shades

No. The Ballerina 60-328 is rated for indoor damp locations only, which covers a normally ventilated bathroom where it gets steam but not direct spray. It is not wet rated, so keep it out of a shower enclosure or anywhere water can hit it directly. For those spots you need a wet location rated fixture.

Bulbs are not included. You need two medium base E26 lamps in A19 shape, 100W maximum each, on a 120V circuit. Standard household screw-in, so an LED A19 with an E26 base works fine as long as you stay at or under the 100W rating. Buy the lamps separately when you order the fixture.

No. The Ballerina 60-328 is not ADA compliant, and its 8.5 inch projection is why: ADA limits wall mounted objects in circulation paths to a 4 inch protrusion. For an accessible restroom or a corridor above 27 inches of finished floor, specify an ADA compliant vanity fixture with a shallower extension instead.

It carries a cULus safety listing, which covers both US and Canadian installation, and it is RoHS compliant. Note that it is listed for indoor damp locations only. One compliance flag for spec packages: the fixture carries a California Prop 65 notice for lead.

The Ballerina 60-328 is offered in Polished Brass with alabaster glass bell shades, in a traditional style. That bright brass with white glass is the pairing found in a lot of 1990s era residential and hospitality baths, so it is a close match if you are replacing one fixture in a building where the rest are polished brass. If your other openings are nickel or bronze, this one will not blend.

The fixture weighs 5.29 lbs with glass and steel construction, well within what a standard wall mounted junction box supports. It mounts to the wall over the box in the usual way for a vanity bar. No special bracing is needed at that weight.