NUVO Lighting 60-3464 1-Light, 8-5/8in, Wall Lantern, Cube Lantern with Clear Beveled Glass, Color retail packaging

Yes. The 60-3464 cube lantern carries a Wet location rating and is built for outdoor use, so it can go on a wall with no overhead cover, including entries exposed to driving rain. It is cULus safety listed.

Bulbs are not included. The fixture takes one E26 medium base lamp in an A19 shape, rated to a maximum of 60W on 120V. For a fleet of these, buy the lamps separately; LED A19 medium base lamps work as long as you stay at or under the 60W rating.

Plan for 4.38 inches of width, 8.63 inches of height, and 6.13 inches of extension off the wall. That projection matters next to a door swing or in a tight walkway, and the narrow 4.38 inch width lets it sit on a pilaster or a narrow trim board beside a door. Note that it is not an ADA compliant fixture, so it is not the right choice for a protruding-object-restricted corridor or path of travel.

Dimming depends entirely on the lamp you put in it. The fixture itself has no driver or integrated LED, it is an incandescent-technology socket fixture, so a standard dimmable A19 incandescent dims on a normal 120V dimmer. If you install an LED A19, it only dims if that lamp is marked dimmable and matched to the dimmer.

It is offered in Old Bronze only. The body is aluminum, which is the usual choice for exterior wall lanterns because it will not rust the way a steel housing can. Glazing is clear beveled glass on all four sides of the cube.

It is a wall-mount fixture for a 120V supply, weighing only 1.61 lbs, so the weight is no issue on a standard exterior wall box. It is hard-wired line voltage, not a plug-in or low-voltage unit, so you need a weatherproof 120V box at the mounting height.

No. The 60-3464 is a lamp-socket fixture using incandescent technology with an E26 medium socket, and it is not CCT selectable. Color temperature is whatever lamp you install, so if you are standardizing a property at 3000K, specify the lamps separately.

Yes. Lead is listed as a CA Prop 65 chemical for this fixture, which matters if you are shipping into California or documenting materials for a public agency or healthcare submittal. The fixture is RoHS compliant.