NUVO Lighting 60-348 Empire, 1-Light, 7in, Vanity with Alabaster Glass Bell Shades

The Empire 60-348 takes a single medium base (E26) A19 lamp rated up to 100W at 120V. No bulb ships with the fixture, so order lamps separately. Dimming depends entirely on the lamp you choose, since the fixture itself is an incandescent-technology housing with no driver in it.

Compact. It measures 6.13 inches high, 6.25 inches in diameter, and projects 9 inches off the wall. That 9 inch extension is the number to watch in a tight powder room or beside a medicine cabinet door swing, since it is deeper than the fixture is wide.

It is rated for indoor damp locations and carries a cULus safety listing, which covers a normal bathroom over a vanity. It is not wet-rated, so keep it out of a shower enclosure or any spot that takes direct spray.

No. The Empire 60-348 is not ADA compliant, and its 9 inch projection from the wall is well past the 4 inch limit ADA allows for objects mounted between 27 and 80 inches above the floor. For a spec'd commercial or multi-family restroom that needs ADA, choose a flush-profile ADA-listed vanity sconce instead.

Yes. It is a wall-mounted fixture catalogued for up or down orientation, so the single alabaster glass bell shade can face either way over a mirror. Shade down throws light onto the counter; shade up washes the ceiling and softens shadows on the face.

Polished brass is the finish offered on the 60-348. Construction is glass and steel, with one alabaster glass bell shade on a steel body, in a transitional style that reads well against traditional trim as well as newer cabinetry.

It works for a fleet standardization if your baths are single-light openings: one E26 socket, 120V line voltage, no driver or LED module to fail, and replacement lamps are ordinary A19 bulbs anyone can stock. Each fixture is listed at 16.7 lbs, so plan on a solid box or blocking rather than a drywall-only anchor. It is RoHS compliant, and carries a California Prop 65 notice for lead.