NUVO Lighting 60-5375 Empire, 1-Light, Wall Sconce, Mahogany Bronze with Frosted Glass

Yes, it is damp location rated, so a bathroom vanity or powder room wall is within its rating. It is an indoor fixture only, so no exterior walls, open porches, or anywhere exposed to direct water. NUVO classes the Empire sconce under vanity and wall applications.

Bulbs are not included. You need one A19 lamp with a medium E26 screw base, 60W maximum, on a 120V circuit. Any standard A19 LED or incandescent replacement with an E26 base drops in.

Extension off the wall is 5 inches, with an overall 10 inch width and 9.63 inch height. That projection is the number to check against a medicine cabinet edge, a mirror frame, or a corridor where a door or traffic passes close to the wall.

No. The Empire 60-5375 is not ADA compliant, and with a 5 inch projection it exceeds the 4 inch limit for wall-mounted objects in an accessible route. For corridors, stairwells, or any path of travel subject to ADA, specify a sconce listed as ADA compliant with 4 inch or less projection. It is fine for a guest room, vanity, or any wall outside the accessible route.

Dimming depends entirely on the lamp you put in it. The fixture itself has no driver or integrated LED, it is an incandescent-technology socket fixture, so a standard incandescent A19 will dim on a common forward-phase dimmer. If you use an LED A19, it dims only if that lamp is marked dimmable and matched to the dimmer.

It carries a cULus safety listing, which covers both US and Canadian installations, and it is built for 120V. That listing is what most AHJs and institutional specs look for on a hardwired luminaire.

The body is steel in a Mahogany Bronze finish with a single frosted glass shade, and the whole fixture weighs 2.46 pounds. Steel construction and light weight mean it mounts to a standard wall box without blocking, and the frosted glass hides the lamp filament so a bare bulb never shows through in a guest room or apartment.

Mahogany Bronze is the only finish offered on the 60-5375, paired with frost glass. If you are standardizing a floor or a block of units, order against that one finish and the Empire collection name so later replacements match.

It is a wall-mounted fixture, hardwired to a standard wall outlet box. At 2.46 pounds it is well under the load any code-compliant fixture box carries, so no extra bracing is needed.

Yes. The Empire 60-5375 is identified as containing lead for California Prop 65 purposes, which matters if you are buying for a California property and have to pass the notice along. The fixture is also RoHS compliant.

No. There is no CCT switch on the fixture because there is no integrated LED, it is a socketed fixture. Color temperature is whatever lamp you install, so pick a 2700K, 3000K, or 4000K A19 to set the look across a job.