NUVO Lighting 60-5450 Mobili, 2 Light, Semi-Flush with Satin White Glass

No. The Mobili 60-5450 is rated for dry locations and indoor use only, so keep it out of bathrooms with shower steam, laundry areas and any covered exterior space. For a bath or porch you need a damp- or wet-rated fixture instead.

It takes two A19 lamps with E26 medium bases, 60W maximum each. Bulbs are not supplied, so add them to the order. Any standard A19 in that wattage works, including LED or CFL equivalents on the same medium base.

Dimming depends entirely on the lamp you install, not the fixture. There is no driver or integrated LED here, it is an incandescent-technology fixture with two medium sockets wired for 120V. Put in dimmable lamps and a compatible dimmer and it dims; put in non-dimmable LEDs and it will not.

The fixture carries a cULus safety listing, which covers both US and Canadian installations, and it is RoHS compliant. It is also flagged under California Prop 65 for lead, which matters if you are documenting materials for an institutional or school project.

One configuration: Brushed Nickel metal with a single Satin White glass shade. The satin glass diffuses both lamps, so you get soft general light rather than a hot spot, and the brushed nickel matches most contemporary door hardware and bath fittings in a unit turn.

It is a ceiling-mounted fixture and ships with 144 inches of supply wire, which is far more than a standard octagon box install needs, so trimming to length at the box is normal. Construction is glass and metal, weighing 7.06 lbs, light enough for a standard listed ceiling box without a fan-rated brace.

Semi-flush hangs the shade a short distance off the ceiling, which here means a 10.25 inch overall height. That reads as a decorative fixture and gives you a little light bounce off the ceiling. If the ceiling is under roughly 8 feet in a walkway, or a door swing passes under it, a true flush mount is the safer call. The Mobili suits bedrooms, entries and dining spaces where the drop is not in the way.

No CCT selector on this fixture. Color temperature is set purely by the A19 lamps you choose, since there is no integrated LED engine. If you want 2700K in living areas and 4000K in back-of-house, buy the lamps accordingly, the fixture itself is identical.