NUVO Lighting 60-5457 Mobili, 1-Light, Mini Pendant with Satin White Glass

It takes one medium base E26 lamp in an A19 shape, up to 100W at 120V, and no bulb ships with the fixture. Order lamps separately. Dimming depends entirely on the lamp you choose, so if the room is on a dimmer, spec a dimmable LED A19 rather than assuming the fixture handles it.

No. The Mobili pendant is rated for dry locations and indoor use only, so it is not suitable for a shower area, a tub zone, a sink location that sees spray, or any exterior or covered outdoor spot. Those openings need a damp or wet rated pendant. Dry indoor rooms, hallways, and island or counter runs away from water are where this one belongs.

At 4.74 lbs total, the Mobili pendant is well under the 50 lb limit a listed ceiling outlet box is rated to support, so a standard box with the fixture's supplied canopy strap works. It is a rod mount ceiling fixture, not a sloped ceiling kit or a track head, so the box has to be on a flat ceiling.

It carries a cULus safety listing, which covers both US and Canadian requirements, and it is RoHS compliant. Note the dry location rating limits where it can be installed in a building, and the California Prop 65 notice on this fixture is for lead.

The Mobili is an incandescent technology fixture, meaning the socket is a plain E26 medium base rather than an integrated LED module. You can lamp it with an LED A19 up to the 100W maximum rating, and that is the usual choice for MRO work since there is nothing to replace but the bulb. It is not CCT selectable, so the color temperature is whatever lamp you install.

One configuration: brushed nickel metal with a single satin white glass shade. The satin white diffuses the lamp rather than leaving a bare bulb visible, which matters if the pendant hangs at eye level over a counter. Body is glass and metal construction, transitional styling, so it pairs with brushed nickel faucets and cabinet pulls already in the room.