NUVO Lighting 60-5516 Vintage, 1-Light, Pendant with Clear Ribbed Glass, Vintage Lamp Included

It takes a single E26 medium base lamp and one is included: a 40W ST19 incandescent vintage style lamp. Fixture wattage is rated to 100W at 120V, so you can relamp with any medium base bulb up to 100W, including an LED filament ST19 if you want the same look with less draw.

No. It is rated for dry locations and indoor use only, so keep it out of bathrooms with shower moisture, covered exterior entries, and anywhere subject to damp air. For a shower area or a porch you need a fixture carrying a damp or wet location rating. Over a kitchen island or dining table it is fine.

Dimming depends on the lamp, not the fixture. The included 40W ST19 incandescent will dim on a standard incandescent dimmer. If you swap to an LED filament bulb, it only dims if that bulb is marked dimmable and matches the dimmer type. There is no onboard driver or selectable color temperature in this pendant.

It carries a cULus safety listing, which covers both US and Canadian installations, and it is RoHS compliant. Note the California Prop 65 disclosure for lead, which matters if you are supplying a job in California that requires the warning.

No extra parts for a normal cord mount install. It arrives as a one-light cord hung pendant with the 12 foot cord and the 40W lamp in the box, mounting to a ceiling outlet box. You would only add material if you are feeding it from a track or canopy adapter, which is not part of the fixture.

One configuration: Rustic Bronze metal with a clear ribbed glass shade. Construction is glass and metal. The clear ribbed glass puts the filament of the included vintage ST19 lamp on display, so it reads well in restaurant, hospitality, and residential rehab work where the bulb is part of the look. Exposed filament also means direct glare, so it is not a good pick where diffuse task light is needed.