NUVO Lighting 60-6427 Winchester, 1-Light, Wall Sconce, Bronze/Aged Wood Finish

Yes, within limits. The Winchester 1-light sconce carries a Damp location rating, so it can go in a bathroom or vanity area where it sees humidity but no direct water contact. It is an indoor-only fixture, so it should not be used on an exterior wall or anywhere exposed to rain.

It is listed ADA compliant, and the geometry backs it up: extension from the wall is 3.88 inches, under the 4 inch maximum protrusion ADA allows for wall-mounted objects in a circulation path. That makes it usable in hallways, stairwells, and common areas of multi-family and institutional buildings.

Plan for a footprint of 5 inches wide by 13.38 inches high, projecting 3.88 inches off the wall. That narrow width suits flanking a mirror or spacing down a tight corridor; the 13.38 inch height is the figure to check against your backsplash or mirror height before you set the box location.

It takes a single medium-base E26 lamp at 120V, 60W maximum, and a 60W ST19 incandescent lamp ships with the fixture. If you want to swap to LED for an MRO standardization program, any E26 LED rated at or below 60W equivalent drops straight in.

Dimming is lamp dependent. The fixture has no integral driver, so with the supplied 60W incandescent lamp it dims on a standard 120V incandescent dimmer. Change to an LED lamp and dimming performance depends entirely on whether that lamp is rated dimmable and matched to the dimmer. It is not a CCT selectable fixture, so color temperature is set by whatever lamp you install.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and it is RoHS compliant. Those are the listings an inspector or a spec reviewer looks for on a 120V hardwired indoor fixture.

Order it as NUVO 60-6427, Winchester collection, in the bronze with aged wood accent finish. That is the single finish configuration for this 1-light model, so repeat orders across a building come out identical. The styling is transitional, which pairs with both traditional and contemporary trim packages.

No. The fixture weighs 2.13 lbs, so a standard wall box with the supplied mounting strap carries it without added blocking. Body construction is steel, which is why it holds up in rental turns and corridor traffic better than a resin housing.

Yes. Lead is the listed Prop 65 chemical for this fixture, so a Prop 65 notice is required for sale and shipment into California. Institutional buyers with chemical disclosure requirements should route this through their standard documentation process.