NUVO Lighting 60-6483 Bliss, 4-Light, Pendant, Driftwood Finish with Polished Nickel Accents

The Bliss 4-light pendant hangs 36.38 inches at its shortest, using just the canopy, and extends to a maximum of 72.38 inches with all the supplied rods stacked. The kit ships with two 6 inch rods and two 12 inch rods, so you can set it in 6 inch steps between those two limits. Over a kitchen island or an entry with a tall ceiling, work back from the 72.38 inch maximum before you commit.

Four candelabra base (E12) lamps, type B shape, 60W maximum each, and no bulbs are supplied. Order them separately. It is an incandescent-rated fixture, so if you want it dimmed, the dimming behavior follows whatever lamp you put in it, not the fixture.

No. The Bliss 4-light pendant is rated for dry locations and indoor use only, so a covered porch, a bath over the tub or shower, or any spot that sees moisture is out of scope. It's cETLus safety listed for interior dry applications. For a porch you need a damp or wet rated pendant instead.

It's a rod-mount ceiling pendant on 120V line voltage, so it lands on a standard ceiling outlet box with the canopy hardware. The thing to check is load: the fixture weighs 19.01 lbs, so the box and its support have to be listed for that weight. A pancake box screwed to drywall won't do it. Twelve feet of supply wire comes with the fixture for the ceiling run.

The body is steel, finished in driftwood with polished nickel accents, and it is cETLus safety listed and RoHS compliant. At 19.01 lbs it's a substantial fixture rather than a light decorative shade. One procurement note for California work: it carries a Prop 65 lead warning.

The Bliss pendant has no built-in CCT selection, it's an incandescent-technology fixture with four E12 sockets. Color temperature is entirely a function of the candelabra lamps you choose, so pick a single lamp spec across all four sockets and across every fixture in the room if you want consistent color.