NUVO Lighting 60-6707 Highline, 1-Light, Vanity, Burnished Brass Finish with White Linen Shade

No. With 7.25 inches of projection from the wall it exceeds the 4 inch maximum protrusion ADA allows for a wall-mounted object in a circulation path, and the fixture is not ADA compliant. For a public restroom or a common corridor in a commercial or multi-family building, specify an ADA-rated sconce instead.

Damp location rated and cULus listed, so it's fine in a bathroom over a vanity where it catches steam, but not in a shower enclosure or anywhere it takes direct water. It's an indoor fixture only, wall mounted.

Plan for 6 inches wide, 16 inches tall, and 7.25 inches of projection off the wall. That extension is the number that matters most in a tight powder room or beside a mirror where a door or a medicine cabinet swings. The linen shade itself is 6 x 6 x 6.75 inches.

Brass with a linen shade, finished in burnished brass with a white shade, and it weighs 2.44 lbs. The shade is fabric, not glass, which is worth knowing for a high-turnover unit: linen shows water spotting and cannot be wiped down the way glass can. In a heavy-traffic bathroom a glass-shaded vanity is easier to maintain.

Yes, and it's a common approach. The 60-6707 is a single-light fixture 6 inches wide, so two or three of them spaced across a mirror give you the same coverage as a bar while letting you set the spacing to the mirror. Each one needs its own wall box, which is the trade-off against a single multi-light bar on one box.

No, it's an incandescent fixture with a socket, not an integrated LED. That's an advantage for a property manager: when the lamp fails, maintenance changes a candelabra bulb instead of replacing the whole fixture. You can run an LED candelabra lamp in it as long as you stay at or under the 60W rating.

The Highline is a wall-mount vanity fixture with 6 inches of supply wire at the canopy, which is short. Mount it to a standard wall box with the box leads pulled forward so you can make up your splices inside the canopy rather than fishing for slack. If your existing box sits deep or the leads are already trimmed short, add a bit of length before you set the fixture.

No, there's no CCT selector on the fixture. Color temperature is set entirely by the candelabra lamp you install, so if you're standardizing the look across a building, buy the bulbs to a single Kelvin value and the fixtures will match.

Yes, lead is the listed Prop 65 chemical for the Highline vanity. The fixture is RoHS compliant. If you're buying for a government, healthcare, or education project with material disclosure requirements, that lead notice is the one to put in front of the spec reviewer.