NUVO Lighting 60-6782 Sloan, 2 Light, Vanity, Polished Nickel Finish with Matte White Shade

The Sloan 2-light vanity is rated for damp locations and indoor use only, so it is fine over a sink or on a general bathroom wall where it may see steam. It is not a wet-location fixture, so keep it out of a shower or tub enclosure spray zone and out of any exterior application.

Bulbs are not included. It takes two medium E26 base lamps, A19 shape, with a maximum of 100W on 120V. Buy the lamps separately and order them with the fixture if you are stocking a bathroom remodel.

No. The Sloan 2-light vanity is not ADA compliant, and with a 6.63 inch projection it will not meet protruding-object limits where that applies. For ADA-governed corridors or accessible restrooms in healthcare, education, or government work, specify a fixture listed as ADA compliant instead.

Dimming is lamp dependent. The fixture itself has no driver or electronics, it is an incandescent-technology socket fixture, so whether it dims comes down to the A19 lamps you put in it. Standard incandescent or halogen A19s dim on a normal forward-phase dimmer; if you use LED A19 replacements, pick lamps marked dimmable and a dimmer rated for LED loads.

It carries a cULus safety listing, good for both US and Canadian installs, and it is RoHS compliant. The body is steel with a polished nickel finish and a matte white shade. Note the California Prop 65 disclosure for lead.

It belongs to Nuvo's Sloan collection in polished nickel with a matte white shade, contemporary styling. If you are standardizing a unit turn or a hotel bathroom package, look for other Sloan pieces in the same polished nickel finish so the vanity, sconces, and any companion fixtures read as one set.

It is a wall-mounted vanity fixture with two sockets. Orientation is set by how the fixture is built, so mount it to the wall box as the fixture is configured rather than inverting it. The supply leads are 6 inches, which is short, so make sure your conductors are long enough in the box to make up the splice comfortably.

At 3.24 lbs it is light enough to hang from a standard wall-mount electrical box with the fixture's own strap, no added blocking needed. It mounts to the wall, not the ceiling.

No, there is no CCT selection on the fixture. Color temperature is entirely a function of the A19 lamps you install, so if a property wants a consistent 2700K or 3000K across units, control that at the lamp spec.