NUVO Lighting 60-6793 Sloan, 3 Light, Vanity, Matte Black and Burnished Brass Finish

The Sloan 3-light vanity measures 21.63 inches wide, 10.38 inches high, and projects 6.63 inches off the wall, so it sits comfortably over a 24-inch vanity top with a little room each side. Over a 36-inch or wider top it will look undersized if you want the fixture to span the mirror.

No. The Sloan 60-6793 is rated for damp locations and listed for indoor use only, so it is fine for general bathroom humidity above a sink or mirror but not for a wet location like directly over a tub or in a shower enclosure. For those spots you need a wet-rated fixture.

Bulbs are not included. It takes three A19 lamps with a medium E26 base, rated up to 100 watts each on a 120V circuit. You can run incandescent, or an LED A19 in the same base if you want the lower load.

No. The Sloan 60-6793 is not ADA compliant, and with a 6.63 inch projection from the wall it exceeds the 4 inch limit for protruding objects in an accessible route. For a commercial restroom or any corridor-adjacent wall, specify an ADA-rated fixture instead.

It carries a cULus safety listing, which covers both US and Canadian installation, and it is RoHS compliant. Note the Proposition 65 disclosure for lead, which matters if you are shipping into California projects.

It is a wall-mount fixture that lands on a standard recessed wall box, and the supply leads are 6 inches long. That is enough for a flush box but tight if your box is set deep or you are reaching across to an offset knockout, so plan your splices accordingly. At 4.56 lbs it is light enough that no extra blocking is needed behind a standard box.

The Sloan uses exposed A19 lamps on a 21.63 inch wide contemporary bar in matte black with burnished brass accents. Orientation is set by the fixture body as built, so order it expecting the configuration shown rather than planning to invert it. If your mirror height is tight, the 10.38 inch overall height is the number to check against your clearance above the mirror.

The fixture base is brass, finished in matte black with burnished brass. That makes it a reasonable choice for multi-family and hospitality bathroom turns where a painted plastic housing would not hold up to repeated bulb changes.

Model 60-6793 is the Matte Black and Burnished Brass 3-light configuration of the Sloan collection. If you need matching fixtures at a different light count or finish, look for other model numbers within the same Sloan collection so the styling stays consistent across openings.