NUVO Lighting 60-6871 Delphi, 4-Light, Vanity, Aged Gold Finish

The Delphi 4-light vanity measures 22.5 inches wide and 13.25 inches high, projecting 6 inches off the wall. At 22.5 inches wide it sits comfortably within a 24-inch mirror or cabinet opening. Budget for the 6 inch extension if the fixture goes above a tight-clearance cabinet door or in a narrow powder room where someone leans in at the sink.

Bulbs are not included. You need four lamps with an E26 medium base, G25 globe shape, rated up to 60W each on 120V. That is 240W total on the circuit if you lamp it at full wattage. Most buyers spec a G25 LED globe at a lower wattage to cut heat and load, and the sockets take it without any change.

The Delphi is an indoor fixture with a damp location rating, which covers a normal bathroom where it picks up steam and humidity, such as above the sink or mirror. Damp rated is not wet rated, so do not install it inside a shower enclosure or directly over a tub where it can take direct water. Safety listing is cETLus.

No. The Delphi is not ADA compliant, and with a 6 inch extension off the wall it exceeds the 4 inch maximum projection ADA allows for wall-mounted items in a circulation path. For a public or accessible restroom in a hotel, school, or apartment common area, spec an ADA-rated vanity or sconce with a projection of 4 inches or less. It is fine above a mirror in a private dwelling unit bath.

It is listed for ceiling or wall mounting, so it can go above a mirror or on a soffit. Because the lamps are exposed G25 globes in E26 medium sockets, the orientation you choose changes the look, not the wiring. Wall mounting over the vanity is the normal application for the 22.5 inch body.

The 60-6871 is built one way: 4-light, aged gold, 22.5 inches wide. That is the only configuration under this part number, so ordering repeat quantities of 60-6871 gets you identical fixtures across every unit. If you need a different finish or a two or three light length for smaller baths, that is a separate Delphi part number rather than an option on this one.

The fixture body is brass, finished in aged gold, and it is a contemporary styling in the Nuvo Delphi collection. Brass is the standard base metal for bathroom fixtures because it does not rust in humidity, which pairs with the damp location rating. Note the fixture carries a California Prop 65 lead warning, which matters if you are supplying into a California project and need to pass the notice through.

Yes, the Delphi 4-light vanity is RoHS compliant and carries a cETLus safety listing for the US and Canada. It does carry a California Prop 65 lead warning, so that disclosure has to travel with it on California jobs.

No, CCT is not selectable on the Delphi 60-6871. There is no LED module or driver in it, it is a four-socket incandescent-technology fixture, so color temperature is entirely whatever G25 lamp you install. If you want 2700K in the residential baths and 3000K in the common areas, you set that with the bulbs.