NUVO Lighting 60-6961 Arabel, 1-Light, Vanity, Brushed Nickel and Nutmeg Wood Finish with Clear Seeded Glass

The Arabel 1-light vanity is rated for damp locations and listed for indoor use only, so it is fine over a sink or on a bathroom wall where it may see steam and humidity. It is not a wet-location fixture, so keep it out of a shower or tub enclosure where it would take direct water, and don't use it outdoors. Safety listing is cETLus.

It takes one standard A19 bulb on an E26 medium base, and no bulb ships with the fixture, so order lamps separately. Maximum wattage is 60W on 120V. The fixture itself has no driver, so dimming depends entirely on the lamp you put in it: a dimmable LED A19 on a compatible dimmer will dim, a standard non-dimmable LED will not.

Plan on a footprint 4.25 inches wide by 9 inches high, with a 6.5 inch extension off the wall. That projection is worth checking against a mirror edge or a medicine cabinet door swing before you set the box. Because it is narrow and tall, it works as a sconce flanking a mirror as well as a single light above it.

No. The Arabel 60-6961 is not ADA compliant, and with a 6.5 inch extension it projects beyond the 4 inch limit that governs wall-mounted objects in accessible circulation paths. For accessible corridors or any ADA-scoped wall location, specify an ADA-rated sconce instead. In a bathroom where it sits above a vanity rather than in the path of travel, the projection is usually not an issue.

Wall mounted and hardwired to a standard 120V branch circuit at a wall box. There is no cord or plug. At 0.84 lbs it is light enough that any properly secured wall box will carry it.

Construction is steel with a clear seeded glass shade, finished in brushed nickel with a nutmeg wood accent. Steel body plus a damp rating is the normal combination for bathroom service. One note for procurement: the fixture carries a California Prop 65 lead warning, which matters if you ship to or specify in California.

No, it is an incandescent-technology socket fixture, not an integrated LED, and there is no CCT selector switch. Color temperature is whatever lamp you install, which is actually an advantage for a property manager standardizing on one 2700K or 3000K A19 across a building. Keep the lamp at or under 60W.

The 60-6961 belongs to NUVO's Arabel collection, so other Arabel fixtures in the brushed nickel and nutmeg wood finish are the way to match it across a room. Style is transitional, so it reads cleanly against both traditional and contemporary trim. Only one finish combination is offered on this 1-light model.