NUVO Lighting 60-6997 Cutty, 3 Light, Semi-Flush Fixture, Burnished Brass Finish with White Fabric Shade

Bulbs are not in the box. You need three medium base E26 lamps in A19 shape, 60 watts maximum each, on a 120V circuit. Standard A19 LED retrofits with an E26 base work fine. Dimming depends entirely on the lamp you put in it, so if the room is on a dimmer, buy dimmable LEDs and match them to the dimmer type.

No. The Cutty 60-6997 carries a dry location rating and is listed for indoor use only, so it does not belong in a shower area, over a tub, in a steam-prone bath, or under any exterior cover where it can see damp air. For a bath or covered entry you need a fixture rated damp or wet. Also worth noting for a linen shade: dry rating means humidity will work on it over time.

There is a frosted diffuser under the linen cone shade, so the three A19 lamps are not visible from below and you get spread light rather than three hot spots. That matters in a bedroom or hall where people look up at the fixture. Light color and dimming come from whatever lamps you install, since the fixture itself is incandescent-technology with no built-in CCT selection.

The Cutty 60-6997 is cULus safety listed, which covers both US and Canadian jurisdictions for a 120V indoor dry-location fixture. One thing to flag on procurement paperwork: it carries a California Prop 65 notice for lead, so if you are buying into a California project the disclosure needs to travel with it.

144 inches, 12 feet, of supply wire ships with the fixture, so there is plenty of lead to reach the box and make up your connections without splicing in extra. Mounting is to a ceiling box; the fixture's 5.3 pound weight is inside what a standard fixture-rated box carries.

Burnished brass with the white shade is the one build of the Cutty 60-6997. There is no black, nickel, or bronze version of this model number, so if you are standardizing finishes across a floor of units, the brass is what you are matching to.