NUVO Lighting 60-7118 Lightcap, 1-Light, Large Pendant Fixture, Burnished Brass Finish

One medium base (E26) lamp, A19 shape, up to 100W at 120V. No bulb is included, so order lamps separately. It is an incandescent-technology fixture, meaning there is no integrated LED and no driver, so you can lamp it with an A19 LED retrofit if you prefer. Dimming depends entirely on the lamp you choose plus a compatible dimmer, since the fixture has no dimming electronics of its own.

No. The Lightcap pendant is rated for dry locations and indoor use only, so it is not approved for a damp or wet location. That rules out covered exterior porches, shower or tub zones, and any spot that sees steam or splash. A kitchen island or dining table in conditioned space is within its rating; directly over a sink is not where a dry-rated fixture belongs.

It carries a cULus safety listing, which covers both US and Canadian requirements, so it is acceptable to inspectors on either side of the border for a 120V dry-location indoor install. Note the CA Prop 65 disclosure for lead, which matters if you are specifying into a California project with disclosure requirements.

Burnished Brass is the only finish this model is built in, so every 60-7118 you order matches. It is a Mid-Century styled cone, which pairs with other warm-metal fixtures in the Lightcap collection rather than with polished or satin brass; if you need a different metal tone for the same look you need a different catalog number, not an option code on this one.

No. The Lightcap large pendant has no CCT selection and no integrated LED, so color temperature is set entirely by the A19 medium-base lamp you install. If you are standardizing a building on one color temperature, buy the lamps to that spec, 2700K or 3000K for example, and the fixture will not fight you on it.