NUVO Lighting 60-7391 Trilby, 1-Light, Wall Sconce, Matte Black with Burnished Brass

Extension is 20.375 inches, which is a long projection for a wall sconce. Overall the fixture is 7.375 inches wide and 16 inches high. In a corridor or beside a bed that reach matters, so check clearance against door swings, walkways, and furniture before committing. On tight hallways an ADA-compliant low-projection sconce is the safer pick, since the Trilby is not ADA compliant.

It is rated for damp locations and listed for indoor use, so a bathroom wall away from direct spray is fine. It is not a wet-location fixture, so keep it out of shower enclosures and off any exterior wall exposed to rain, even under a covered porch where blowing water can reach it.

One A19 lamp with a medium E26 base, rated up to 60W at 120V. No bulb ships with the fixture, so order lamps separately. An LED A19 in an E26 base works as long as you stay within the 60W maximum equivalent rating.

The Trilby sconce carries a cULus safety listing, which covers it for both US and Canadian installations. It is not ADA compliant, so it will fail spec on corridors and circulation paths where protruding-object limits apply. For those areas you need a sconce with a shallow projection called out as ADA compliant.

Wall mount, at 4.51 lbs, with 72 inches of supply wire at the fixture. The light weight means a standard wall box in good condition will carry it, but with a 20.375 inch extension the load sits well off the wall, so make sure the box is firmly anchored and not just plaster-clipped.

Model 60-7391 is built in one combination, matte black with burnished brass. There is no alternate finish under this part number, so if the spec calls for something else it is a different model.

Yes. Lead is the listed Prop 65 chemical for this fixture. If you are shipping into California or supplying a public agency that requires the disclosure, flag it on your submittal.