NUVO Lighting 60-7422 Dover, 3 Light, Large Flush Mount, Vintage Brass with Clear Glass

The Dover 60-7422 takes three E26 medium base lamps in an A19 shape, rated to 60W each, and bulbs are not included. You'll need to supply three A19 medium-base lamps when you install it.

No. It's rated for dry locations and indoor use only, so keep it out of bathrooms with shower moisture, laundry rooms, and any exterior or covered outdoor location. For those spots you need a damp or wet rated fixture.

Dimming depends on the lamp you install, not the fixture. The 60-7422 has no integrated driver or LED engine, it's a three-socket incandescent-technology fixture on 120V, so if you put dimmable lamps in it on a compatible dimmer it will dim. Non-dimmable LED retrofits will not.

It carries a cETLus safety listing, which covers both US and Canadian requirements for the fixture as built. It's a dry-location indoor fixture, so typical uses are corridors, lobbies, bedrooms, and units rather than wet or damp areas.

The 60-7422 is built in vintage brass with clear glass, and that's the configuration. There's no CCT selectable switch on it either, since it's a lamp-based fixture rather than an integrated LED, so color temperature is set entirely by the three A19 lamps you choose.

Yes. The Dover 60-7422 is listed with a CA Prop 65 chemical disclosure for lead. If you're buying for a California project or jobsite, that disclosure needs to pass through to the end user in your documentation.

The 60-7422 is part of NUVO's Dover collection, so it coordinates with other Dover-family fixtures for matching finishes across openings and rooms. This particular piece is the large 3-light flush mount at 20 inches diameter, which is the one you'd use where a 20 inch ceiling spread fits, with smaller Dover pieces or the same unit repeated elsewhere.