NUVO Lighting 60-7531 Intersection, 1-Light, Vanity, Burnished Brass with Clear Glass

The Intersection 60-7531 is an indoor fixture with a damp location rating, so it is fine over a vanity or sink in a bathroom where it sees humidity. It is not rated for wet locations, so keep it out of direct spray inside a shower or tub enclosure and off exterior walls. It carries a cULus safety listing.

No bulb ships with the 60-7531, so order lamps separately. It takes a single E26 medium base lamp rated up to 60W on 120V. The fixture is built around a T10 shape lamp, which is the exposed tubular style that suits the clear glass and shows the filament. Dimming depends entirely on the lamp you choose, since the fixture itself is incandescent technology with no driver.

Plan on 4.5 inches wide, 8.5 inches tall, with a 5.375 inch extension off the wall. The shade itself measures W:3.54 H:6.50. It is a wall mount fixture in the up-or-down category, so you can orient the shade to throw light toward the ceiling or down onto the counter. The 5.375 inch projection matters next to a medicine cabinet or a swinging door.

No. The 60-7531 is not ADA compliant, and its 5.375 inch extension from the wall exceeds the 4 inch protrusion limit ADA applies to objects mounted between 27 and 80 inches above the floor. For a public or commercial restroom that has to meet ADA, specify a vanity or sconce with 4 inches or less of projection. In private dwelling units and non-regulated areas it is not an issue.

It is a single-lamp fixture capped at 60W, which is accent or flanking light rather than full task lighting for a mirror. Common practice is a pair mounted either side of the mirror, or one centered above a small powder room mirror. At 4.5 inches wide it is narrow enough to flank a mirror without crowding it.

Dimming is lamp dependent on this fixture. There is no driver or integrated LED in it, just an E26 socket, so whether it dims and how smoothly comes down to the bulb. A standard incandescent or halogen T10 dims on a common incandescent dimmer; if you use an LED filament lamp, match the dimmer to that lamp's listed compatibility.

Steel body with glass, finished in Burnished Brass with a clear glass shade. It weighs 2.18 lbs, light enough for a standard wall box with no extra bracing. The clear glass means the lamp is visible, so the bulb you pick is part of the look. Note the fixture carries a California Prop 65 notice for lead.

Model 60-7531 is the Burnished Brass with clear glass version of the Intersection collection, and that is the only finish this model number covers. If you are matching other openings in a building, order by the Intersection collection name and the specific model number for each finish you need.

72 inches of lead wire, which is more than enough slack to make up connections in a standard wall box without splicing in extra conductor. It wires to 120V.

No. The 60-7531 is a lamp-ready incandescent-technology fixture with no CCT selection and no integrated LED. Color temperature is whatever E26 lamp you install, so if a project spec calls for 3000K across a building, specify the bulbs to match.