NUVO Lighting 60-7710 Teton, 2 Light Medium Flush Mount, Medium Base, 60W, Natural Brass Finish, Clear Beveled Glass

The Teton 60-7710 is damp location rated and listed for indoor use, so it works in a bathroom ceiling outside the direct shower spray zone. It carries a cETLus safety listing. For a wet location, such as inside a shower or an open exterior soffit, you need a wet-rated fixture instead.

Dimming is lamp dependent. The fixture itself has no driver or electronics, so whether it dims comes down to the bulbs you put in it. Incandescent or halogen E26 lamps dim on a standard forward phase dimmer; if you use LED lamps, they must be marked dimmable and matched to the dimmer to avoid flicker or buzz.

At 4.27 lbs the fixture is well inside the 50 lb limit a standard listed ceiling outlet box supports, so no fan-rated or braced box is required. It mounts to the ceiling only; there is no wall mount configuration for this model.

Natural Brass is the only finish offered on the 60-7710. The body is steel with a natural brass finish and a single clear beveled glass disc shade. If you are standardizing a corridor or a unit turnover package, order the whole run from the same collection to keep the brass tone consistent, since brass finishes vary noticeably between manufacturers.

It is an incandescent-technology fixture with two medium base sockets, not an integrated LED, and it has no CCT selectable switch. You choose the color temperature by choosing the lamp, which means you can put 2700K bulbs in it now and swap them later without changing the fixture.

Yes. The Teton 60-7710 is flagged for lead under California Proposition 65, so the warning applies for sales and installs in California. That is a labeling requirement, not a restriction on use in commercial or residential ceilings.