NUVO Lighting 60-7804 Boliver 3 Light Pendant, 14in, Vintage Brass Finish, Clear Seeded Glass

The Boliver 3-light pendant takes three E12 candelabra-base bulbs, Type B shape, up to 60W each. Bulbs are not included, so order them separately. The fixture is incandescent technology at 120V; dimming depends on the lamp you install, not the fixture, so if you need dimming use a dimmable lamp on a compatible dimmer.

As shipped the Boliver measures 37.38 inches high and 14.13 inches wide, and it can be extended to a maximum height of 86.28 inches. It comes with a 48 inch chain and 12 feet (144 inches) of wire, so you adjust the hang by removing chain links and taking up the slack wire. Over a kitchen island or entry you want roughly 30 to 36 inches of clearance above the counter, which the 48 inch chain gives plenty of room to dial in.

No. The Boliver pendant is rated for dry locations and indoor use only, so keep it out of covered exterior spaces, enclosed porches, and anywhere it sees moisture or splash. For a shower zone or an outdoor soffit you need a fixture carrying a damp or wet location rating.

The Boliver weighs 12.75 lbs and is ceiling mounted on a chain, so a standard outlet box rated for 50 lb luminaire support handles it without a separate brace. If you are hanging it from an older box or a fan-rated retrofit, confirm the box is listed for fixture support before you load it.

The Boliver pendant carries a cETLus safety listing, which covers both the US and Canada, and it is RoHS compliant. That listing plus the dry-location, 120V rating makes it suitable for indoor corridors, lobbies, and apartment interiors on standard line voltage.

One configuration is offered: Vintage Brass finish with clear seeded glass, on a steel body. The clear seeded glass means the bulbs are visible, so pick lamps you are happy to look at (vintage-style candelabra filament lamps suit the traditional styling). Vintage brass is a warm antiqued brass, so it pairs with other aged-brass trim rather than with bright polished brass.

Yes. The fixture itself is an incandescent-technology pendant with three E12 candelabra sockets at a 60W maximum per socket, so any E12 LED lamp rated at or under that 60W equivalent limit will work. Since no lamps ship with it, you are free to choose LED from the start. Color temperature is set by the lamp you buy, as the fixture is not CCT selectable.

Yes, the Boliver pendant carries a California Proposition 65 disclosure for lead. If your project requires Prop 65 documentation in the submittal or on the jobsite, include that warning for this fixture.