NUVO Lighting 60-7921 Admiral 1-Light Wall Sconce, Matte White and Natural Brass Finish, White Opal Glass

Yes. The Admiral 1-light sconce carries a Damp location rating and is listed by NUVO under its Vanity & Wall category, so it can go in a bathroom where it sees humidity but no direct water contact. It is an indoor-only fixture, so do not use it on an exterior wall or in a shower spray zone.

It takes one A19 lamp with an E26 medium base, rated to 60W maximum at 120V. No bulb ships with the fixture, so add lamps to the order. Dimming depends entirely on the lamp you choose, since the fixture itself is an incandescent-technology housing with no driver of its own, put an LED A19 marked dimmable on a compatible dimmer if you want dimming.

Plan for a fixture 6.5 inches wide and 15.38 inches tall that projects 6.63 inches off the wall. That extension matters in a tight hallway or beside a door swing, and in a corridor it is the number to check against clearance rules for your building type. The Admiral is not an ADA compliant fixture, so it should not be used where protruding-object limits apply.

The fixture carries a cULus safety listing, which covers both US and Canadian installs, and it is RoHS compliant. Note that NUVO reports Lead as a California Prop 65 chemical for this item, which is the disclosure to pass along on California projects.

Yes. NUVO classifies the Admiral in its Wall - Up or Down subcategory, so the same fixture can be oriented with the white opal glass facing up for ambient wash or down for task light at a mirror or vanity. It is a wall-mount fixture only, not ceiling rated.

At 2.42 pounds the Admiral is light enough that a properly secured wall box handles it with no extra backing. The body is steel, finished matte white with natural brass accents, so the weight stays low for a fixture of this size.

No. The Admiral is a lamp-based fixture with no CCT selectable switch and no integrated LED module. Color temperature is whatever A19 lamp you install, which also means you can standardize a whole building on one lamp spec and swap it later without touching the fixture.