NUVO Lighting 62-1108 12W, LED, White, Taper Back, Monopoint, 3000K, 36 degree Beam Angle

It mounts directly to the ceiling. A monopoint like the 62-1108 is a single-point fixture, so there is no track section or connector to buy. Mounting method is ceiling, and the head sits on an arm with a 4.75 inch extension off the canopy. Fixture weight is 1.03 lbs, so a standard ceiling outlet box carries it without extra support.

No. The 62-1108 is rated for dry locations and indoor use only. Keep it out of covered porches, soffits, garages that see moisture, and anywhere inside a shower or tub zone. For those spots you need a fixture carrying a damp or wet location rating.

The fixture is dimmable and runs on 120V line voltage, so it works on a standard forward or reverse phase wall dimmer wired to the circuit. Because the LED is integrated rather than a replaceable lamp, the driver is what dims, so a dimmer rated for LED loads gives the smoothest low end. There is no low voltage transformer or separate driver to source.

1020 lumens from 12 watts, delivered in a 36 degree beam. That is a medium flood, tight enough to frame a painting or a merchandise display without spilling across the whole wall, and wide enough that you are not aiming a pinspot. At 3000K with a CRI of 90, colors and skin tones read accurately, which is what matters on retail goods, gallery work, and hospitality millwork.

No. It is fixed at 3000K with no CCT selection switch, and the LED is integrated so there is no lamp to swap. If the rest of the building is on 4000K, this one will read noticeably warmer. Spec a 3000K room or choose a different head.

There is no replaceable bulb. The LED is integrated into the head, so at end of life the fixture itself is replaced. Average rated life is 30,000 hours, which for a retail space running 12 hours a day is roughly seven years. Facility buyers standardizing on this head should plan replacement at the fixture level, not the lamp level.

Overall dimensions are 2.75 inches length, 4.75 inches width, 2.75 inches height, with a 4.75 inch extension. That extension figure is the projection you plan around when the head is aimed. It is a compact accent head rather than a deep cylinder, so it works under lower soffits and in tight display cases where a long-barrel fixture would hang into sightlines.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. Note the California Prop 65 disclosure for lead, which matters if you are shipping into California projects and maintaining SDS-style documentation.

White only, on an aluminum housing. There is no bronze or black option on this model, so if you are matching a fleet of dark-finish heads in a lobby or gallery, this is not the one. Aluminum construction helps the head shed heat from the integrated LED, which is what protects rated life in an enclosed display location.