NUVO Lighting 62-1513 Ellusion, LED Large Wall Sconce, 13W, Matte Black Finish with Seeded Glass

Yes. The Ellusion 62-1513 carries a damp location rating, so it can go in a bathroom including over a vanity or near a shower, as long as it is not in direct spray. It is an indoor-only fixture, so no exterior entries or open porches. Wall mounted, 4.75 inches wide by 14.38 inches high with a 2.38 inch extension, so it fits a narrow space beside a mirror.

The Ellusion 62-1513 is listed ADA compliant, and its 2.38 inch extension from the wall keeps it inside the 4 inch maximum projection ADA allows for wall-mounted objects in circulation paths. It is also cETLus safety listed and RoHS compliant, which covers the typical submittal requirements on institutional and multi-family jobs.

No bulbs to buy. The 62-1513 uses an integrated LED, so the light source is built into the fixture and cannot be relamped. It draws 13W at 120V and is rated for 30,000 average hours. When the LED reaches end of life the fixture itself gets replaced, which is worth knowing if you are standardizing across a building and want spares on the shelf.

The Ellusion 62-1513 is dimmable on 120V line voltage. Because it is an integrated LED driver rather than an incandescent lamp, pair it with an LED/ELV-rated forward-phase dimmer. An old incandescent-only dimmer is the usual cause of flicker or a limited dimming range on fixtures like this.

It delivers 700 lumens from 13W with a single shade. That is roughly the output of a 60W incandescent, so for a mirror you generally want a pair, one on each side, rather than a single unit. CRI is 90, which renders skin tones well for grooming and makeup, a real consideration in hospitality and multi-family bathrooms.

Fixed. The Ellusion 62-1513 is not CCT selectable, so there is no field switch to change between 2700K and 4000K. If you are mixing it with other fixtures in the same room, order the matching Ellusion pieces or confirm the color temperature of what is already installed so the openings do not read differently.

The fixture weighs 4.51 lbs, well within what a standard wall-mounted outlet box and strap will carry, so no blocking or special bracket is needed in typical drywall construction. Body materials are aluminum, glass, and steel.

The 62-1513 is a single-finish item: matte black with clear seeded glass. The seeded glass is a slightly rippled, bubbled clear, so it diffuses without hiding the glow. If you need another finish in the Ellusion family it is a separate catalog number, not an option on this one.

Yes. Lead is identified as a Prop 65 chemical for the 62-1513, so the warning applies for California installations. That matters on institutional and government submittals where the disclosure has to be attached to the package.