NUVO Lighting 62-1702 Blink Pro, 9W, 5in, LED Fixture, CCT Selectable, Round Shape, Bronze Finish, 120V

The 62-1702 Blink Pro carries a Wet location rating, so it can go in a shower surround, over a tub, or in a steam-prone laundry or bath ceiling. It is classified for indoor use, so keep it under cover rather than on an exposed exterior soffit. Safety listing is cETLus.

It is a surface flush mount measuring 5 inches in diameter and only 0.67 inches high, so it projects about two thirds of an inch below the ceiling plane. That is low enough for low-headroom corridors, closets, stair landings, and basement ceilings where a dome fixture would be in the way. It mounts to the ceiling, not recessed, so no plenum depth is needed.

One SKU covers it. The 62-1702 is CCT selectable, so the color temperature is chosen at the fixture rather than by ordering a different part number. For a property manager standardizing a building, that means a single stocked item can match 3000K-ish warm areas and cooler back-of-house ceilings. CRI is 90, so color rendering is high enough for bath and corridor use.

At 9W drawing on 120V the Blink Pro puts out 650 to 680 lumens. That is a sensible single-fixture output for a closet, pantry, small bath, entry vestibule, or stair landing. For a larger room or a corridor run, plan on multiple units spaced out rather than relying on one.

Yes, the fixture is dimmable on 120V line voltage. It uses an integrated LED driver, so pair it with a dimmer rated for LED loads; a legacy incandescent-only dimmer on a 9W load is where flicker and dropout usually come from.

No. The LED is integrated with no socket or lamp base, so there is nothing to relamp. Rated average life is 50,000 hours, and at end of life the whole fixture is swapped. For MRO planning that means no bulb stock to carry, but the fixture itself becomes the replacement part.

Surface mount. It is a close-to-ceiling flush fixture that fastens to the ceiling, so it works where there is no room above the deck for a recessed housing, such as concrete ceilings or finished basements. Buyers wanting a flat ceiling plane with no visible trim ring need a true recessed downlight instead, not this edge-lit surface unit.

The base is die-cast aluminum rather than stamped steel or plastic, which is part of why it carries a wet location rating. Finish on this version is bronze, and the fixture weighs 0.59 lbs, light enough to land on a standard ceiling box without extra bracing.

Yes. Lead is the listed CA Prop 65 chemical for this fixture, which matters for institutional and government procurement packages shipping into California. The fixture is also RoHS compliant.

The 62-1702 is the bronze round version, 5 inches in diameter, 9W. If the other ceilings in the building are white or brushed nickel, you need a different part number in the Blink Pro family; the finish on this one is not field-changeable.