NUVO Lighting 62-652 Willis, LED Outdoor Large Wall with Antique White Glass

Yes. The Willis 62-652 wall lantern carries a Wet location rating and is built for outdoor use, so it can go on an exposed wall, open entry, or an unprotected building face that takes direct rain. Safety listing is cETLus.

Plan on 9 inches wide by 17.63 inches high, with a 9.75 inch extension off the wall. That projection matters at a doorway or a walkway where a code-required clear path is in play, and the fixture is not ADA compliant, so keep it clear of protrusion-limited routes. It weighs 10.12 lbs, so it needs a proper weatherproof box, not just a surface clip.

Dimming is lamp dependent. The fixture itself has no driver controlling dimming, it is a line voltage 120V socket fixture, so whether it dims comes down to the LED lamp installed in it. If you are putting these on a dimmed exterior circuit, specify a dimmable 120V A19 LED lamp rather than relying on the one in the box.

For a single residential or multi-family entry, yes. 800 lumens from one lamp is roughly a 60W incandescent equivalent, which is typical for a doorway or garage-side lantern meant to light the door and the immediate landing. It is not a floodlight, so for a parking area or a long walkway you would space several of them or add a dedicated area light. The 90+ CRI helps with color rendering on brick, stone, and door finishes at night.

One configuration only: Textured Black housing with Antique White glass. The body is steel in a transitional style. If you are standardizing an entry or a building face, every unit will match, and the textured black reads the same as other black exterior hardware. There is no alternate finish or glass option on the 62-652.

Wall only. The 62-652 is a wall lantern with a wall mounting method and a 9.75 inch extension that assumes a vertical surface. For a post top or a hanging pendant over an exterior entry, you need a different fixture type from the same style family, not this one.

No. CCT selectable is listed as No, so there is no switch on the fixture to change from warm to neutral white. Because the light source is a replaceable E26 lamp, your color temperature is whatever lamp you install, which is actually an advantage if you are matching existing exterior fixtures across a property.

The fixture is RoHS compliant, and it carries a California Prop 65 disclosure for lead. For public agency, healthcare, or school procurement where both items get asked on the submittal, those are the two to report along with the cETLus safety listing.