NUVO Lighting 62-669 Canal LED Large Vanity, Matte Black Finish, White Acrylic Lens

The Canal LED large vanity measures 36 inches wide, 4.75 inches high, and extends 4.13 inches off the wall. Over a 36 inch vanity cabinet it runs the full cabinet width, which looks deliberate but leaves no margin, so check your mirror or backsplash edges first. The shallow 4.13 inch projection keeps it clear of a swinging medicine cabinet door in most layouts.

No. The Canal LED vanity is rated for indoor damp locations only, which covers a normal bathroom wall where it sees steam, but not a wet location such as directly inside a shower or tub surround or anywhere exposed to direct water spray. For those spots you need a wet-rated fixture.

No bulbs to buy. The Canal vanity uses an integrated LED board, not a replaceable lamp, so there is no socket and no relamping. It is rated for an average 30,000 hours, drawing 39W for 3120 lumens. When the LED module reaches end of life the fixture is replaced rather than re-lamped, which is worth knowing if you are standardizing a multi-family or hotel bathroom package.

No. The Canal LED vanity is not ADA compliant, and its 4.13 inch projection off the wall is the reason to check it against your spec, since accessible-route limits govern how far a wall-mounted fixture can protrude. For an ADA restroom on a government, healthcare, or education job, specify a fixture listed as ADA compliant instead.

Yes, the Canal LED vanity is dimmable and runs on 120V line voltage. Because it is an integrated LED fixture rather than an incandescent lamp, pair it with a dimmer rated for LED loads; an old incandescent-only dimmer is the usual cause of flicker or buzz on a fixture like this.

For a double vanity it is a reasonable single-fixture solution. The Canal puts out 3120 lumens across a 36 inch linear housing with a white acrylic lens, so the output is spread rather than concentrated in one spot. The 90 CRI matters more than the raw lumens in a bathroom, since color rendering that high is what makes skin tones and makeup read accurately at the mirror.

Fixed. The Canal 62-669 is not CCT selectable, so there is no field switch to change between warm and cool white. If you are mixing it with other fixtures in the same bathroom or trying to match existing fixtures across a building, you are matching to one fixed output rather than dialing it in on site.

Yes, the Canal LED vanity carries a cETLus safety listing, which covers both US and Canadian requirements for an inspector reviewing the install. It is a 120V hard-wired wall-mount fixture, so it goes on a standard wall box on a dedicated or shared bathroom lighting circuit.

Matte black is the finish offered on the 62-669, over a steel base with a white acrylic lens. Steel rather than plastic housing is the relevant point for rental and hospitality turns, where the fixture gets wiped down and knocked around. Styling is contemporary, so it sits with matte black faucets and cabinet pulls.

At 5.24 lbs the 36 inch Canal vanity is light enough for a single installer, though the length makes it awkward to hold level while you land the wiring. The weight is low enough that the standard wall box mounting strap carries it without blocking or additional backing.

Yes. The Canal LED vanity is identified as containing lead under California Prop 65, so it carries that chemical disclosure. Institutional and government buyers who track Prop 65 reporting on delivered goods should flag it in their submittal paperwork.