NUVO Lighting 62-679 Kagen LED Large Vanity, Matte Black Finish, White Acrylic Lens

It is rated for damp locations and indoor use only, so over a vanity or mirror in a bathroom is fine. Do not install it inside a shower enclosure or anywhere it gets direct spray, and do not use it outdoors or in an unprotected exterior soffit, which needs a wet-rated fixture.

No bulbs to buy. The Kagen uses an integrated LED board rather than a socketed lamp, rated at 30,000 average hours. The tradeoff is that there is nothing to replace at end of life, so at that point the fixture itself is swapped out. For a property with a lamping program, that removes it from your bulb stocking list entirely.

No. The Kagen large vanity is not ADA compliant, and it projects 3.25 inches from the wall. For an ADA-governed circulation path you need a fixture protruding no more than 4 inches when mounted between 27 and 80 inches above the floor, so if the opening is on an accessible route and your inspector is enforcing it, specify an ADA-listed vanity instead.

Yes, the Kagen LED vanity is dimmable and runs on 120V line voltage at 39W. That means a standard forward-phase LED/ELV-compatible wall dimmer on a 120V branch circuit. It is not a low-voltage fixture, so no remote driver or transformer is involved.

3,120 lumens from a single 37.58 inch fixture is a lot of output for one bathroom, comfortably enough as the primary light over a double vanity without a separate ceiling fixture. It also delivers 90 CRI, which matters at a mirror where skin tone and color matching are what people judge the light by. Lower-CRI fixtures are where you get complaints about makeup looking wrong.

The Kagen carries a cETLus safety listing, which is the recognized equivalent of a UL listing for both US and Canadian jurisdictions, so it satisfies the standard inspector requirement for a listed luminaire. Note that it is declared under CA Prop 65 for lead, which matters if you are shipping to a California job and have disclosure obligations.

The housing is steel with a white acrylic lens over the LED, finished in matte black. Total weight is 3.67 lbs, so a single standard wall box with the supplied mounting strap carries it without blocking or extra bracing, even at the 37.58 inch length.

The 62-679 is matte black only. Matte black with the white acrylic diffuser is the single configuration under this model number, so if the rest of the suite is nickel or bronze you are looking at a different part number, not an option on this one.

It is a wall-mount luminaire and the practical answer is horizontal above the mirror. At 37.58 inches long it is built as a linear bar across the top of a vanity, not as a sconce. For flanking a mirror vertically you want a short sconce or a small vanity bar, not this length.