NUVO Lighting 62-732 Bond, Double 17-1/2in, LED Vanity with White Acrylic Lens

The Bond 62-732 is a wall mount fixture measuring 17.5 inches in one direction and 6 inches in the other, with a 4 inch extension off the wall. That 17.5 x 6 inch proportion suits either orientation, so it can run horizontally over a mirror or vertically alongside one. The 4 inch projection is what usually decides it in a tight bath, since that is how far the fixture sits off the finished wall.

Yes, it carries a Damp location rating and is an indoor fixture, which covers a bathroom vanity wall where it sees humidity but no direct spray. It is cETLus safety listed. Do not use it inside a shower enclosure or tub surround, where a wet location rated fixture is required.

The LED is integrated, so there is no lamp to change and no socket. Rated average life is 30,000 hours, which for a bathroom running a few hours a day is roughly a couple of decades of service. For property managers standardizing across units, that is the tradeoff: no relamping labor and no bulb inventory, but end of life means swapping the fixture.

It is a dimmable 120V, 20W integrated LED fixture. Because the load is only 20W, an older incandescent style dimmer with a high minimum load may buzz or fail to dim smoothly to the bottom of the range. Pair it with a LED rated dimmer sized for low wattage loads for clean performance.

It is listed as ADA compliant, and the 4 inch extension keeps it within the protruding objects allowance for wall mounted items in a circulation path. That combination is what institutional and multi-family buyers need for common area and commercial restrooms.

1580 lumens from a 20W LED is in the range where one fixture handles a standard single-sink vanity for grooming light. Two of these flanking a mirror will comfortably light a larger bath. CRI is 90+, so skin tones and paint colors read accurately, which is what matters at a mirror.

The color temperature is fixed, not field selectable, so every unit installed will match the next without anyone setting a switch. If you need to tune warm to cool on site, choose a CCT selectable fixture instead.

Brushed Nickel is the finish offered on the 62-732, over a steel body, with a white acrylic lens as the diffuser. It reads Transitional, so it sits with both traditional and contemporary faucet and cabinet hardware in brushed nickel.

At 3.47 lbs the fixture is well inside what a standard wall box and strap will carry, so no blocking or extra bracing is needed. It wires as a 120V hardwired wall fixture.

For California, the fixture carries a Proposition 65 warning for lead. It is also RoHS compliant. Procurement groups that track both should file it accordingly on the submittal.