NUVO Lighting 62-921 Loop, Single LED Wall Sconce, Brushed Nickel Finish

It is listed as ADA compliant, and the 3.13 inch extension is what makes that work: the fixture projects less than the 4 inch limit that governs wall-mounted objects in accessible routes. For a hospital, school, or hotel corridor where protrusion is the issue, that projection is the number your inspector will look at. It is also cETLus safety listed and RoHS compliant.

No. The light source is an integrated LED, so there is no socket and no lamp to change. When the LED module reaches end of life the fixture is replaced, not relamped. Rated life is 30,000 hours, which at roughly 4 hours a day is well over 20 years of service. For MRO buyers standardizing a property, that trades bulb stocking and ladder time for eventual fixture replacement.

The Loop 62-921 is dimmable and runs on 120V line voltage at 13W. The catch with any low-wattage LED is the dimmer itself: a 13W load sits far below the minimum load of an older incandescent-style dimmer, so you will want an LED-rated forward or reverse phase dimmer to avoid flicker or drop-out at the bottom of the range. No separate driver or transformer is needed, it wires straight to a 120V branch circuit.

1040 lumens from 13 watts, with a CRI of 90 plus. The 90 plus color rendering is the spec that matters in a bathroom or dressing area, since skin tones and makeup read accurately at that level. 1040 lumens from one fixture is roughly equivalent to a 75W incandescent, so a pair flanking a mirror gives solid vanity lighting. Color temperature is fixed, this is not a CCT selectable fixture, so every unit you buy will match.

Yes, lead is the listed Prop 65 chemical for the 62-921. If you are specifying for a California project or a public agency that requires disclosure, that warning needs to pass through on your submittal. The fixture is separately RoHS compliant and cETLus safety listed.