NUVO Lighting 62-934 Slice, Double LED Wall Sconce, Aged Bronze Finish

The Slice 62-934 is rated for damp locations and listed for indoor use, so it is fine above a bathroom vanity or mirror where it may see humidity. It is not a wet-location fixture, so keep it out of direct shower spray and off exterior walls. At 24 inches wide it is sized for a double-sink or wide single vanity run.

Yes. The Slice 62-934 is ADA compliant and projects only 3 inches off the wall, which keeps it inside the 4 inch limit for objects mounted in a path of travel. That makes it usable in hallways, stairwells and common areas of multi-family and institutional buildings where wall-mounted fixtures have to stay flush.

No. The light source is an integrated LED, so there is no socket and no lamp to change. The whole fixture is replaced at end of life. It draws 26W at 120V and puts out 2080 lumens, which is roughly what a pair of 75W incandescent vanity bulbs would give you with far less load on the circuit.

The Slice 62-934 is a wall-mount fixture that lands on a standard recessed box. It is 24 inches wide, 4.5 inches high, projects 3 inches, and weighs 2.68 lbs, so drywall with a properly secured box carries it without blocking or extra bracing. Because the body is long and the mount is central, check the box is level before you set the plate or the bar will read crooked.

The Slice 62-934 is dimmable on a standard 120V circuit. Because it is an integrated LED driver rather than a lamp socket, it needs an LED-rated (electronic low-voltage or LED/CFL) forward-phase dimmer, not an old magnetic incandescent dimmer. Pairing it with a legacy dimmer is the usual cause of flicker or a limited dimming range.

It is a fixed color temperature fixture, not CCT selectable, so what you order is what you get on every unit. CRI is 80, which is normal for residential and multi-family vanity and corridor lighting. If you are standardizing across a building and want to change white point by room, you would need a selectable-CCT fixture instead.

The Slice body is acrylic rather than glass. For a glass front installer or a property manager, that means no shattering risk and a light 2.68 lb fixture, but it also means you clean it with a soft cloth and a non-ammonia cleaner. Glass cleaners with solvents will haze acrylic.

Aged Bronze is the finish on model 62-934. The Slice collection is a contemporary linear style, so if you need brushed nickel or white to match other openings in a building you are looking at a different model number within the collection rather than an option on this one.

Yes. The fixture carries a California Proposition 65 notice for lead. Specifiers on California public and institutional work typically need that noted in the submittal package.