NUVO Lighting 63-511 Under Cabinet LED End to End Connector

It's a hard connector that joins two NUVO under cabinet LED light bars directly end to end, with no cord or gap between them, so a run reads as one continuous line of light. Power carries through the joint, so only the first fixture in the run needs to be fed. The body is plastic with copper contacts, and it runs on 120V like the fixtures it links.

Very little. The connector measures 1.5 inches long by 0.67 inches wide by 0.35 inches high, so the fixtures sit within about an inch and a half of each other. That's the piece to use when the customer wants the run to look unbroken under a cabinet face; if you need to jump a gap between two separate cabinets, an end to end connector is the wrong part.

No. The 63-511 is rated for indoor, dry locations only. Keep it out of bathrooms with direct shower exposure, unconditioned garages, exterior soffits, and anywhere it can see condensation. For a damp or wet area you need a fixture and accessory family rated for that location.

It carries a cETLus safety listing, which covers both US and Canadian requirements, so it clears the listed-component question inspectors ask on multi-family and commercial cabinet lighting. It is a 120V line voltage accessory, not low voltage.

One per joint. Three bars butted together in a single run take two connectors; four bars take three. Order by counting the joints, not the fixtures. Each connector weighs almost nothing at 0.01 lbs, so quantity has no bearing on freight.

White is the only finish it's built in. That matches the standard white under cabinet bar housings, and since the connector sits tight between two fixtures it is largely hidden by the cabinet face anyway.

Yes. The 63-511 is identified as containing lead under California Prop 65, so it carries the required warning on shipments into California. Institutional and government buyers who track Prop 65 on submittals should include it.