NUVO Lighting 65-1084 LED 4ft, Ceiling Wrap, 40W, 3000K, White Finish, 100-277V

Yes. The 65-1084 is a universal-voltage fixture, rated 100V to 277V, so the same part number works on 120V residential-style branch circuits and on 277V commercial lighting circuits. That means one SKU covers mixed-voltage buildings instead of stocking two.

No. The 65-1084 is a non-dimming 40W LED wrap. If it lands on a circuit with a dimmer, the dimmer has to come out or be bypassed, and it won't pair with a 0-10V control system. For spaces where you need level control, pick a wrap that lists dimming.

Dimensionally it's built for that opening: 47.50 inches long, 5.5 inches wide, 2.63 inches high, on a steel base, mounting to ceiling or wall. The LED module is integrated, so there are no lamps or ballast to maintain afterward. Two things to check before you commit: it's non-dimming, and at 40W it puts out 3200 lumens, which is below a typical two-lamp T8 wrap, so confirm the light level suits the space.

Indoor damp locations, yes. The 65-1084 carries a damp location rating, which covers laundry rooms, basements, and enclosed corridors where humidity is present but water doesn't hit the fixture. It is not rated for wet locations or true outdoor exposure, so don't use it under an open soffit or anywhere it can take direct rain.

No lamps to buy. The LED board is integrated into the fixture, so there's no socket, no tube, and nothing to relamp. Rated life is 50,000 hours, and at end of life the whole wrap gets replaced rather than serviced. For an MRO stockroom that means you carry the fixture, not lamps and ballasts.

It carries a cETLus safety listing, which covers both US and Canadian requirements, so it satisfies the listed-equipment requirement on commercial and institutional projects on either side of the border. It's also RoHS compliant. Note the CA Prop 65 disclosure for lead if you're shipping into California.

The 65-1084 delivers 3200 lumens at 40W, which works out to 80 lumens per watt. That's a moderate output suited to corridors, back-of-house rooms, storage, and utility spaces rather than high-bay or task-critical areas. Space them on the ceiling based on your target footcandles for the room type, since each fixture is contributing 3200 lumens.

It weighs 4.47 lbs, so a single installer can hold it up while making up the connections. Mounting is ceiling or wall, which makes it workable as a stairwell or corridor fixture as well as a flat ceiling surface mount. The housing is steel.

White is the only finish offered on the 65-1084, under part number 65/1084. That keeps it consistent across a floor if you're ordering in quantity for a building standard, and white is what blends into most commercial ceilings.