NUVO Lighting 65-1097 LED 2ft, Ceiling Wrap with Motion Sensor, 20W, 4000K, 120-277V

The 65-1097 is a 2 ft wrap measuring 24.50 inches long, 5.5 inches wide and 2.64 inches high, so it covers the footprint of a typical 2 ft fluorescent wrap. It surface mounts to a ceiling or wall, and at 2.69 lbs it is light enough for standard surface fastening. Measure the existing fixture's footprint first, since an older wrap with a wider housing can leave paint lines outside the 5.5 inch body.

No dimmer. The 65-1097 is non-dimmable, so wiring it to a dimming control will not work and can damage the driver. It has its own built-in motion sensor for occupancy switching, which is how the fixture is intended to be controlled. It accepts 120V through 277V, so it drops onto either a 120V residential circuit or a 277V commercial lighting branch without changing the fixture.

Indoor only, with a damp location rating. That covers a covered corridor, a stairwell, a laundry room or a storage area where moisture collects, but it is not a wet location fixture, so it should not see direct water or weather exposure. For an open parking deck or anywhere rain can reach it, use a wet-rated vapor-tight fixture instead.

No separate sensor. The motion sensor is built into the fixture, so it wires like an ordinary surface fixture on a constant-power circuit and switches itself on occupancy. That is the usual way to pick up automatic shutoff in a janitor closet, restroom or storage room without running low-voltage sensor wiring or adding a control device to the box.

Integrated LED, so there are no lamps to change. When the light source reaches end of life the fixture gets replaced as a unit. Rated average life is 50,000 hours, which is why these are specified for MRO work where getting a ladder into the space is the expensive part.

No. The 65-1097 is fixed at 4000K and is not CCT selectable, so it will read visibly cooler next to 3000K or 3500K fixtures and warmer next to 5000K. If you are standardizing a building on one color temperature, confirm the rest of the openings are 4000K, or choose a field-selectable wrap instead.

It is cETLus listed, meaning it is certified to the applicable US and Canadian safety standards for the fixture type, and it is RoHS compliant. Note that it carries a California Prop 65 notice for lead, which matters if you are documenting materials for a public or healthcare project.

Steel housing with a white finish, in a utility style wrap. Steel holds up better than plastic in back-of-house areas that take cart and ladder contact, which is the usual reason property managers and MRO buyers spec a wrap over a plastic strip in corridors and service rooms.

Yes, it is rated for ceiling or wall mounting, so it works above a workbench, along a stairwell wall or over a utility sink as well as overhead. Keep in mind the motion sensor's coverage pattern shifts when the fixture is turned on its side, so aim it toward the area where people actually enter.