NUVO Lighting 65-1155 LED 4ft, Wide Strip Light, 40W, 4000K, White Finish, Connectible with Emergency Back Up

Yes. The 65-1155 is a universal-voltage fixture rated 120V-277V, so it drops onto a 120V branch circuit in a residential or light-commercial space or onto 277V lighting panels in a commercial or institutional building without ordering a different part number. That is the main reason to standardize on it across a mixed-voltage facility.

It puts out 4,829 lumens at 40W in 4000K neutral white, which is in the same output range as a typical two-lamp T8 4 ft strip while drawing less power. CRI is 80, normal for utility and back-of-house spaces. Color temperature is fixed at 4000K, so if you need 3500K or 5000K to match adjacent fixtures, this is not the one to order.

Yes, the 65-1155 is a connectible fixture, so units can be joined in a continuous row rather than each being home-run. That is how it gets used in warehouse aisles, corridors and parking structures where you want an unbroken 4 ft on 4 ft line. Total run length still has to respect the circuit's load calculation at 40W per fixture.

The 65-1155 ships with emergency back up built into the fixture, so it serves as its own emergency light on loss of normal power. That removes the need to hang a separate twin-head emergency unit beside it in egress corridors and stairwells, which is usually the reason this version gets specified over the standard strip.

It is an indoor fixture with a damp location rating. Damp covers unheated garages, basements, covered walkways and similar spaces where condensation occurs but the fixture is not exposed to direct water. For a wet location such as an open dock face, a wash-down bay or anywhere it will be hosed or rained on, specify a wet-rated vaportight fixture instead.

Both. The 65-1155 is rated for ceiling or wall mounting, so it works as a surface-mounted ceiling strip in a corridor, stockroom or garage, or turned onto a wall for stairwell and utility-room lighting. It is a surface fixture, not a recessed or troffer-style unit.

The 65-1155 is a dimmable integrated LED fixture, so it can be put on a dimming control rather than straight switching. The LED board and driver are built in; there are no lamps to buy or replace, and the fixture is rated for an average 50,000 hours.

White is the only finish for the 65-1155, matching the typical utility-style housing used in back-of-house and corridor applications. There is no other color option under this part number.

The fixture is RoHS compliant. It also carries a California Proposition 65 notice for lead, which is standard disclosure on many wired fixtures and does not affect installation or use.