NUVO Lighting 65-1700 2ft LED, 20W Linear Strip Light, CCT Selectable, White Finish, 120-277V, Microwave Sensor

Yes. The 65-1700 is a universal-voltage fixture, rated 120V through 277V, so the same part number works on 120V residential-style branch circuits and on 277V legs off a 480/277 three-phase panel. That is what lets a facility standardize on one strip across a mixed-voltage building instead of stocking two versions.

No. The 65-1700 is rated for indoor use only, with a damp location rating. Damp covers places like covered corridors, stairwells, and utility rooms where moisture or condensation occurs but no direct water contact. An open parking garage or any spot exposed to weather or hose-down needs a wet-location rated fixture instead.

The sensor is built into the fixture, so no wall occupancy sensor or separate control wiring is required. A microwave (RF motion) sensor detects movement rather than body heat, which means it sees through the fixture lens and reacts to motion in spaces where a PIR sensor can be blocked. For stairwells, storage rooms, and back-of-house corridors it drops the fixture count of separate sensor devices to zero.

Color temperature is selectable at the fixture, not at order time. The 65-1700 is CCT selectable, so one part number covers the whole range and you set it during install with the onboard switch. That is useful when you are matching existing lighting in a corridor and do not know the installed Kelvin until you are on site. CRI is 80.

The 65-1700 delivers 2735 to 2830 lumens at 20 watts. The range reflects the selectable color temperature settings, which shift output slightly. That works out to roughly 137 to 142 lumens per watt. For a 2 ft fixture it is bright enough to replace a two-lamp fluorescent strip in utility and storage spaces.

Both. The mounting method is ceiling or wall, so the same strip can be surface mounted overhead in a corridor or run horizontally on a wall above a workbench. The body measures 24.00 in long, 2.95 in wide, and 3.27 in high, and the fixture weighs 1.78 lbs, light enough to anchor into a standard outlet box or ceiling deck without supplemental support.

The fixture is dimmable. Note that it also carries a built-in microwave motion sensor, so if you are pairing it with a dimming control you are layering that on top of occupancy switching. For spaces where you only want on/off response to motion, no additional dimmer is needed at all.

No. The 65-1700 uses an integrated LED board, so there is no socket and no replaceable lamp. When the light source reaches end of life the whole fixture is replaced. It is rated at an average 50,000 hours, which at 12 hours a day is over 11 years of service.

The housing is steel with a white finish. The fixture is RoHS compliant, and it carries a California Proposition 65 notice for lead, which matters for procurement paperwork on public and institutional projects in California.

The 65-1700 is sold in a single configuration: a 2 ft, 20 watt strip in white finish. There is no finish choice to specify on the order. Length is fixed at 24.00 in, so longer runs are built by installing multiple fixtures end to end rather than by ordering a longer unit.