NUVO Lighting 65-213 LED Security Light, Dual Head, Bronze Finish, 3000K, Motion Sensor

Yes. The 65-213 dual head LED security light is rated for outdoor use and carries a Wet location rating, so it can go on an exposed exterior wall that takes direct rain. Housing is die-cast aluminum and the fixture is cULus safety listed. Mounting is wall only, so it is not intended for pole, eave-pendant, or recessed applications.

No. The 65-213 is non-dimmable, so it must not be wired to a dimmer. It runs on motion sensor control, which means it should be fed a constant unswitched 120V hot (or a switch left closed) for the sensor to do its job.

No. The 65-213 is fixed at 3000K warm white and is not CCT selectable. If you are standardizing a property on cooler 4000K or 5000K security lighting, you need a different model, because this one cannot be field-adjusted.

It is a wall-mount fixture running on 120V line voltage, so it hard-wires at the wall over a standard round or octagonal outdoor box. The body measures 7.63 in. L x 4.16 in. W x 4.13 in. H and weighs 2.8 lbs, so a conventional box and the supplied gasket plate carry it without extra bracing. It is a line-voltage fixture only, so no low-voltage transformer circuit.

The 65-213 draws 20W and delivers 1900 lumens total across its two heads, with 80 CRI at a 3000K warm white color. That output lands in the range of a single mid-size halogen flood but at a fraction of the draw, and the LEDs are rated for 50,000 average hours so there is no lamp replacement cycle on the fixture.

The LED array is integrated, with no replaceable lamp and no socket or bulb base to service. At 50,000 average rated hours the maintenance plan is fixture replacement, not relamping, which is the trade-off against a halogen head that you relamp every season.

The 65-213 is built in Bronze only. Both adjustable heads and the housing share that finish, which matches well against brown trim, brick, and bronze-anodized storefront. For a white or black housing you are looking at a different NUVO model number.

That is its intended use. It is catalogued for commercial outdoor security duty with a utility styling, die-cast aluminum housing, wet-location rating, and cULus listing, which covers loading docks, service doors, alley elevations, and apartment breezeway exteriors. The motion sensor keeps it off until something approaches, which suits occupancy-driven areas rather than dusk-to-dawn continuous lighting.

The 65-213 is RoHS compliant and carries a California Prop 65 notice for lead. Institutional buyers submitting material disclosures should record both. It is not ADA compliant, so avoid mounting it in a protruding-object zone along an accessible route.