NUVO Lighting 65-537R1 LED Large Flood Light, 50W, 3000K, Bronze Finish, 100V-277V, Dimmable

Yes. The 65-537R1 LED flood light is rated 120V-277V, so it drops onto 120V, 208V, 240V or 277V single-phase branch circuits without a separate driver or transformer. That makes it usable on the 277V lighting panels common in commercial and multi-family buildings as well as on standard 120V residential circuits.

It's built for exposed outdoor use. The 65-537R1 carries a Wet location rating and is listed for outdoor service, with a die-cast aluminum housing for heat dissipation and corrosion resistance. Wet rating means direct exposure to rain and splashing is acceptable, so building perimeters, parking areas and unprotected wall mounts are all within rating.

Fixed. It is not CCT selectable, so there's no field switch for 4000K or 5000K; the fixture is 3000K warm white only, at 80+ CRI. If you're standardizing a property and the other exteriors are 4000K, this one won't match and you'd want a different color temperature in the same family rather than trying to adjust this head.

The 65-537R1 carries a cULus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. It also carries a California Prop 65 notice for lead, which matters if your facility tracks Prop 65 disclosures on submittals.

At 50W drawing and 6500 lumens delivered, the 65-537R1 covers the output range of the older small-to-mid wattage HID and halogen floods used on building walls and poles. Because the LED is integrated there is no lamp to source again, and the fixture is rated for 50,000 average hours, which is the number that usually decides the retrofit for maintenance crews who don't want to re-lamp a high mount.

Yes, the fixture is dimmable. The LED and driver are integrated, so dimming is handled through the fixture's own driver rather than a screw-in lamp. Pair it with a dimming control suited to LED drivers at the voltage you're wiring (120V through 277V).

The fixture measures 8.53 inches long by 9.57 inches wide by 1.97 inches high and weighs 3.62 lbs. That's a slim, light head, so a standard outdoor junction box or knuckle bracket on a solid wall surface carries it without supplemental blocking.

No bulbs to buy. The LED array is integrated into the fixture and ships as part of it, so there's no socket, no lamp base, and nothing to stock as a spare. The tradeoff is that at end of life the whole head is replaced rather than re-lamped, which is why the 50,000 hour rating is the spec to plan maintenance around.