NUVO Lighting 65-587R1 LED Backlit Flat Panel with Emergency Backup, 1ft x 4ft, Wattage and CCT Selectable, 100-347V

The 65-587R1 backlit panel measures 47.72 inches long by 11.84 inches wide, which fits a nominal 1 ft x 4 ft grid opening, and it stands 3.09 inches deep so you need that much clear plenum above the tee bar. It's a ceiling-mount fixture and weighs 4.98 lbs, light enough for standard grid support, though local code may still require independent safety wires on the fixture.

Yes. The 65-587R1 accepts anything from 100V to 347V on the same fixture, so it runs on 120V, 277V, and 347V circuits without ordering a different model. That's useful when one building has 277V commercial branch circuits and another area is on 120V, since you can stock a single part number for both.

Nothing to specify at order time. The panel is field-selectable at 20W, 30W, or 40W, giving roughly 2200 to 4600 lumens depending on the setting. You set it at install, so one fixture covers a corridor at the low setting and an open office at the high one. Color temperature is selectable on the fixture as well, and CRI is 80+.

It has an integral emergency backup, so the panel itself carries the egress light when normal power drops. That means you don't need a separate bug-eye or emergency ballast pack in that bay. It's a 1x4 backlit LED panel at 100-347V, safety listed cETLus.

Damp location rated and indoor only. That covers bathrooms, locker rooms, and indoor areas with humidity, but not direct exposure to rain or an unprotected exterior soffit. For anything genuinely wet or outdoors, you need a wet-listed fixture instead.

No. The LEDs are integrated into the 65-587R1, so there's no lamp to buy, install, or replace later. Rated life is 50,000 hours. The housing is aluminum and steel in a white finish.

Yes, the panel is dimmable, so it can go on the same dimming control as the other fixtures in the space. Bear in mind the emergency section is there to hold light at full output on loss of power regardless of dimmer position.

The fixture has a 3.54 inch wire length, so plan on landing your connections close to the housing. Anything further and you'll want a flexible whip from the j-box to the fixture.

It's RoHS compliant, and the California Prop 65 disclosure on the 65-587R1 lists lead. Safety listing is cETLus, which covers both US and Canadian installations, matching the 100-347V range for Canadian 347V service.