NUVO Lighting 65-636 Square LED, Wide Beam Angle Canopy Light, 3K/4K/5K CCT Selectable, 20W/30W/45W Wattage Selectable, Bronze Finish

Wet location rated, so the 65-636 can take direct rain and spray, not just the sheltered damp spots under a soffit. The housing is die-cast aluminum and the fixture is cULus certified. It mounts to the ceiling surface, so you need a finished mounting surface overhead, not a stem or pendant drop.

Yes. The 65-636 runs on a universal 120V-277V input, so the same part number works on a 120V house panel at one building and a 277V commercial circuit at the next. For a property manager standardizing across a portfolio, that means one SKU on the shelf instead of two voltage-specific ones.

It's a field-selectable fixture, not a fixed one. Wattage selects between 20W, 30W and 45W, and color temperature selects between 3000K, 4000K and 5000K. That's set at the fixture during install, so the electrician picks the output on site rather than the buyer guessing the right SKU at the order stage. Output runs 2663 to 6288 lumens across the wattage settings, with 80 CRI.

Pick by the lumen number, not the watts. On the 65-636 the three settings span 2663 to 6288 lumens. The low setting suits a low-ceiling entry canopy or a covered walkway where 45W would be glare. The 45W top setting is the one for a garage deck or a fuel canopy where fixtures are spaced out and you need the coverage. Because it's selectable, you can commission the whole run at one setting and change it later if the light levels come in wrong.

The LED is integrated, so there's no lamp to buy, stock, or relamp. Rated life is 50,000 hours. For an MRO buyer that removes the lamp line item from the maintenance budget entirely, but it also means the whole fixture gets replaced at end of life rather than a lamp swap.

The 65-636 is dimmable, so it can go on a control zone rather than straight switching. Pair it with a driver-compatible control on the circuit; the fixture itself is a 120V-277V integrated LED unit.

Wide beam is what you want when the fixture sits on a low canopy ceiling and has to wash the whole area under it evenly, which is the typical gas canopy, drive-through, garage deck or loading dock case. The 65-636 is the wide beam version. A narrow or tight distribution makes sense when the mounting height is high and you're trying to push light down a long throw without spilling it; at canopy mounting heights that creates hot spots under each fixture and dark gaps between them.

RoHS compliant, and cULus certified. It does carry a California Proposition 65 notice for lead, which matters for institutional and government procurement paperwork in California. Those are the compliance items on record for this fixture.

Bronze only, on a die-cast aluminum housing. If you're matching existing bronze exterior fixtures on a property it will blend; if the building standard is white or dark sky black, this part number won't get you there.

NUVO Lighting 65-636 (also written 65/636). It's the square, wide beam, CCT and wattage selectable canopy light in bronze. That number is what to quote to make sure you get the wide beam square version rather than a different distribution or finish in the family.