NUVO Lighting 65-647R1 LED Adjustable High bay, 220W, 4000K, Integrated Sensor Port, 120-277V
LED Adjustable High bay - 220 Watt - 4000K - Integrated Sensor Port - 120-277 Volt
Manufacturer Resources
Product Specs
- CCT Selectable:
- No
- Dimmable:
- Yes
- Lamp Base:
- Integrated
- Lamp Shape:
- Integrated LED
- Location Rating:
- Damp
- Lumens:
- 30315L
- Product Type:
- Linear Hi-Bay
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Bulb Base:
- Integrated LED
- Bulbs Included:
- Integrated
- Product Group:
- Commercial Indoor Lighting
- CRI:
- 80+
- Product Subgroup:
- Linear Hi-Bay
- Safety Listing:
- cULus
- Subcategory:
- Linear
- Technology:
- LED
- Wire Length:
- 5.91"
- Avg Rated Hours:
- 50000
- CA Prop 65 Chemicals:
- Lead
- Base Material:
- Aluminum Alloy
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V-277V
- Product Length:
- 26.00"
- Mounting Method:
- Ceiling
- Product Style:
- Utility
- Product Height:
- 1.88"
- Product Category:
- Hi-Bay
- Product Weight:
- 10.36lbs
- Product Width:
- 14.25"
- Product Wattage:
- 220W
NUVO Lighting 65-647R1 – Frequently Asked Questions
1) Will the NUVO 65-647R1 high bay run on 277V, or do I need a separate 120V version?
One fixture covers both. The 65-647R1 is a universal-voltage LED high bay rated 120V-277V, so the same part number works on 120, 208, 240 or 277 volt branch circuits. No separate SKU or voltage tap to specify on the order.
2) How much light does a 220W LED high bay put out, and what area will it cover?
The 65-647R1 delivers 30,315 lumens at 220 watts, which works out to roughly 138 lumens per watt. That output is aimed at warehouse, shop and industrial bays where you are replacing metal halide or high-output fluorescent strips. Color is fixed at 4000K neutral white with 80+ CRI, so it reads as clean white rather than warm.
3) Can I add an occupancy or daylight sensor to this NUVO high bay later?
Yes. The 65-647R1 is built with an integrated sensor port, so a compatible sensor module can be added rather than wiring an external control into the circuit. The fixture is also dimmable, which is what lets a daylight or occupancy control actually modulate output instead of just switching it.
4) Can this LED high bay be installed in a damp area like a parking garage or wash bay?
It is rated for damp locations and listed as an indoor fixture, so covered areas with humidity or condensation are fine. It is not a wet-location fixture, so do not use it anywhere exposed to direct spray or weather. Safety listing is cULus.
5) Is this high bay color selectable, or is the 4000K fixed?
Fixed. CCT selectable is listed as No, so the 65-647R1 is 4000K only. If you are standardizing a facility where some areas want 5000K, you will need a different fixture for those bays rather than a field switch on this one.
6) How much does this 26-inch linear high bay weigh for hanging and structural support?
The fixture weighs 10.36 lbs and measures 26.00 inches by 14.25 inches by 1.88 inches. At that weight a single chain, cable or hook point per mounting position is typical, and the low 1.88 inch profile keeps it tight to the deck in lower-clearance bays. It is a ceiling-mounted fixture with an aluminum alloy housing.
7) Do I need to buy lamps or LED boards separately for this high bay?
No. The LEDs are integrated into the 65-647R1 and included with the fixture, so there is nothing to lamp and no ballast or driver to source separately. Rated life is 50,000 hours, and when the LED array reaches end of life you replace the fixture rather than a lamp.
8) What does adjustable mean on this NUVO high bay, and what finish does it come in?
It is an LED adjustable high bay with a linear form, meaning the light body can be angled rather than firing straight down only, useful over racking aisles or work benches where you want the beam thrown off-vertical. It ships in white, and the housing is aluminum alloy with a utility style.
9) How long are the supply leads on this high bay for making up the whip connection?
Wire length is 5.91 inches, so plan on landing the fixture leads in a junction box or flexible whip close to the mounting point. If your box is further off, you will need a whip or a nearby disconnect to reach it.
10) Is this high bay RoHS compliant, and does it carry a Prop 65 warning?
RoHS compliant, yes. It also carries a California Proposition 65 chemical listing for lead, which is standard disclosure on many electrical assemblies and matters mainly if you are shipping into or specifying for California projects.
How fast can I get the NUVO Lighting 65-647R1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NUVO Lighting 65-647R1 come with a warranty?
Absolutely. The NUVO Lighting 65-647R1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NUVO Lighting 65-647R1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the NUVO Lighting 65-647R1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.