NUVO Lighting 65-683 60W LED Area Light with Photocell, CCT Selectable and Dimmable, Gray Finish, 120-277V, Ultra Bright Lumens

The 65-683 is a universal-voltage fixture, accepting anything from 120V to 277V on the same driver. That means it drops onto 120V single-family or small-commercial circuits and onto 277V legs of a 480/277 three-phase service in a warehouse or retail center without ordering a different part number. It draws 60 watts.

Mounting is wall or pipe arm. So it will go onto a horizontal pipe/tenon arm off a pole, or straight to a wall or parapet for building-perimeter and loading-dock lighting. It is not a slip-fitter-only or a yoke-only fixture. The housing is aluminum and the whole unit weighs 5.07 lbs, which is light enough for a standard wall box or arm without extra bracing.

Yes. It carries a Wet location rating and is listed for outdoor use, so direct rain exposure on a wall, canopy edge or pole arm is fine. Safety listing is cULus, which covers both US and Canadian installs.

A photocell is built into the 65-683, so it switches on at dusk and off at dawn with no separate control, timer or contactor needed. It is also dimmable if you want to tie it into a 0-10V style control scheme, but for a basic parking lot or dock light you can wire it straight to constant power and let the photocell do the work.

The 65-683 is CCT selectable, so the color temperature is set on the fixture at install rather than fixed at the factory. That is what lets a property manager match a new fixture to the existing lot or building perimeter instead of ending up with one cooler or warmer pole. Color rendering is 70 CRI, which is normal for outdoor area and parking applications.

Output is 8400 to 9600 lumens depending on the CCT setting selected, drawn at 60 watts. Compare that to the delivered lumens of the fixture you are pulling down rather than to its nameplate wattage, since an older HID head loses output over life and its reflector throws less of it onto the pavement. For a lot relamp, confirm your target footcandles against the 8400-9600 lumen figure and your pole spacing.

The head measures 9.13 inches long, 13.62 inches wide and 7.36 inches high, at 5.07 lbs. That matters when you are reusing an existing arm or wall plate - check the width against your mounting pattern and the height against any decorative shroud or canopy soffit it has to sit under.

No - the LED is integrated, with no socket or bulb base. There is nothing to relamp; the whole head is the serviceable unit. Rated life is 50,000 hours, so for an MRO or facilities program you plan on fixture replacement rather than stocking spare lamps.

Gray only, on an aluminum housing. There is no bronze or black option under this part number, so if you are standardizing a site on dark bronze poles and arms, a gray head will read differently against them.

It is RoHS compliant, and it carries a California Prop 65 listing for lead. Institutional and government buyers who track Prop 65 disclosures on submittals should note the lead listing in their documentation package.