NUVO Lighting 65-840-5 LED Area Light Type V, 100W, Bronze Finish, 4000K, 120-277V

A slip-fitter mount is included with the 65-840-5. That means it clamps onto a round tenon or horizontal arm rather than bolting flat to a pole face, so if your pole already has a tenon you can reuse it. If your poles are drilled for a direct arm mount, you need a separate arm or adapter, since only the slip-fitter is supplied here.

Yes. The driver is multi-volt, 120V through 277V, so the same fixture works on 120, 208, 240 or 277 volt service. That is what makes it practical to standardize one part number across a mixed-voltage property instead of stocking two.

Type V throws light in a round, symmetrical pattern all the way around the fixture. It suits the interior of a parking lot, a courtyard, or a yard where the pole sits in the middle of the area being lit. If the pole is along a property line or at the edge of a lot, a symmetrical pattern wastes light past the boundary, and a Type III or forward-throw Type IV optic is the better choice there.

Wet location rated and cULus certified, so it can be used fully exposed outdoors on poles and arms, not just under a soffit. The housing is die-cast aluminum, which is what carries the heat sinking and the corrosion resistance on a pole-top fixture.

13,793 lumens at 100 watts. That output range is typically used to replace 250W to 400W metal halide or high pressure sodium shoebox heads, with the advantage that output does not fall off the way HID lumens do over a lamp's life.

Yes, the 65-840-5 is dimmable. The LED array is integrated, so there is no lamp to pull and no socket, and dimming is handled at the driver through your control wiring rather than at the fixture.

The 65-840-5 is fixed at 4000K with 80 CRI, and it is not a field-selectable CCT fixture, so you cannot dial it to 3000K or 5000K on site. 4000K is the common neutral white used on parking and site lighting; if your existing heads are 5000K the difference will read as warmer side by side.

It measures 20.71 inches long, 12.4 inches wide and 3.11 inches high, and weighs 7.88 lbs. That weight and the shallow 3.11 inch profile keep EPA loading low, which matters when you are hanging two or four heads off one pole.

No. The LED is integrated with no lamp base, rated 50,000 average hours, so there is nothing to relamp. At end of life you replace the fixture or the driver, not a bulb. For MRO planning that removes lamp stocking entirely from the maintenance cycle.

Yes, lead is listed as a California Prop 65 chemical for this fixture. The fixture is also RoHS compliant, which matters for institutional and government specs that call it out.

Bronze only. It is a single-finish, utility-style fixture, so if you are matching poles already painted dark bronze or black it blends; there is no white or gray option on this model.