NUVO Lighting 65-842-5 LED Area Light Type V, 150W, Bronze Finish, 4000K, 120-277V

The 65-842-5 ships with a slip-fitter mount, so it goes onto a pole tenon or a mast arm rather than bolting flat to a square pole face. If your poles are drilled for a direct arm mount, you either need a tenon adapter on the pole top or a different fixture configuration. The head weighs 8.08 lbs, so pole and tenon loading is rarely the limiting factor on a standard area light pole.

It is an outdoor fixture with a Wet location rating and a die-cast aluminum housing, so exposed pole-top or arm mounting in rain and snow is what it is built for. The safety listing is cULus Certified, which covers both US and Canadian installations.

Type V throws light in a symmetric circular pattern around the pole, which is what you want for the middle of an open parking lot, a yard, or a courtyard where there is no wall or property line to respect. If the pole sits at the edge of a lot or along a street and you need the light pushed forward away from a neighbor, a Type III or Type IV forward-throw distribution is the better choice. The 65-842-5 is the Type V, 150W version at 19,507 lumens.

Generally one for one. The 65-842-5 puts out 19,507 lumens at 150 watts, which is in the range a 400W metal halide head delivers after lamp depreciation, so it is a common one-for-one pole-head swap at roughly a third of the connected load. Rated life is 50,000 hours, versus the lamp replacement cycle you are on now with HID.

Yes, the 65-842-5 is a dimmable fixture, so it can be tied into a 0-10V style control scheme or a scheduling system for after-hours level reduction. Note the color temperature is fixed at 4000K and is not field selectable, so you cannot change CCT at the fixture.

No. The LEDs are integrated into the 65-842-5, with no socket or replaceable lamp, so at end of life the head is replaced rather than relamped. Rated average life is 50,000 hours.

The 65-842-5 is fixed 4000K with 80 CRI, a neutral white that reads as a clean, slightly cool light. It will blend with other 4000K LED area lights but will look noticeably whiter next to 3000K warm LED heads and much whiter next to legacy high pressure sodium. For a mixed lot, standardize the whole row on one CCT rather than swapping a single pole.

The housing measures 20.71 inches long, 12.4 inches wide, and 3.11 inches high, and weighs 8.08 lbs. That slim 3.11 inch profile keeps wind load down on existing poles, which matters when you are reusing poles originally engineered for a shoebox HID head.

Bronze is the finish on the 65-842-5. It is the standard dark finish for pole-mounted area lighting and matches most existing bronze poles and arms on commercial lots.

Yes. The 65-842-5 is identified as containing lead for California Prop 65 purposes, which is typical of die-cast aluminum and electronic components. The fixture is also RoHS compliant.